The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation ocurred because the DLL c:\Windowssystem32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
Error message RTHDCPL.EXE illegal system DLL Relocation - explain please?
Go to the website of your sound card manufacturer (RealTek) and download updated drivers. HHCTRL.OCX is part of your sound card installation.
hawthorn
Monday, May 24, 2010
Computer Error RTHDCPL.EXE - ILLEGAL SYSTEM DLL RELOCATION?
It says - The system Dll user 32.dll was relocated in memory. Theapplication will not run properly. The relocation occurred because the dll C:\windows\system32\HHCTRL.OCX occupied an address change reserved for windows system Dlls. The vendor supplying the DLL should be contacted for a new DLL.
Can anyone tell me what is going on and also, what is a DLL?
I have a compaq and it is windows XP. This is a new PC, i just got at christmas time. I don't know what to think of this error. I have done a spyware check, and a anti virus and a Registery mechanic. I have also checked the windows update and that is all set. I am lost, and help please.
Thanks
Computer Error RTHDCPL.EXE - ILLEGAL SYSTEM DLL RELOCATION?
http://support.microsoft.com/kb/925902
Known issues
After you install this security update on a Windows XP Service Pack 2 (SP2)-based computer, Realtek HD Audio Control Panel (Rthdcpl.exe) may not start. Additionally, you receive an error message that is similar to the
following:
Rthdcpl.exe - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows
system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
Update for Windows XP (KB935448)
Install this update to resolve an issue where the Realtek HD Audio Control Panel may not start after you install security update KB925902 (MS07-017) and security update KB928843 (MS07-008). http://www.microsoft.com/downloads/d...d...
Supported Operating Systems: Windows XP Service Pack 2
Reply:User Tiger62 has the right answer but the URL he included was truncated. Try this one:
Reply:I had the exact same thing just happen to my computer yesterday. It was after I updated Microsoft. Is that when you got the message? I tried everything to fix it. Now I don't get that message but instead everytime I open a program it says "Windows Installer, preparing to install" Microsoft sucks.
Reply:The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
This problem occurs when the following third-party applications are installed:
• Realtek HD Audio Control Panel
• ElsterFormular 2006/2007
• TUGZip
• CD-Tag
Download a fix from microsoft
http://www.microsoft.com/downloads/thank...
Reply:DLL is dynamic link library, if the error happens on an old machine and it is already been running well for awhile then i think it is great to check the hard disk for corrupted files which may cause some of the files to fail, otherwise perform a test on the memory as partial damage memory usually fails to load and execute file resulting in DLL failure.
Reply:I just got the same thng on mine, an ASUS. Its caused by the latest Microsoft update programs hogging memory (again). The DLL it's complaining about is the driver for your sound system. Go to the sound card (not compaq) web site and get the latest drivers.
Can anyone tell me what is going on and also, what is a DLL?
I have a compaq and it is windows XP. This is a new PC, i just got at christmas time. I don't know what to think of this error. I have done a spyware check, and a anti virus and a Registery mechanic. I have also checked the windows update and that is all set. I am lost, and help please.
Thanks
Computer Error RTHDCPL.EXE - ILLEGAL SYSTEM DLL RELOCATION?
http://support.microsoft.com/kb/925902
Known issues
After you install this security update on a Windows XP Service Pack 2 (SP2)-based computer, Realtek HD Audio Control Panel (Rthdcpl.exe) may not start. Additionally, you receive an error message that is similar to the
following:
Rthdcpl.exe - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows
system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
Update for Windows XP (KB935448)
Install this update to resolve an issue where the Realtek HD Audio Control Panel may not start after you install security update KB925902 (MS07-017) and security update KB928843 (MS07-008). http://www.microsoft.com/downloads/d...d...
Supported Operating Systems: Windows XP Service Pack 2
Reply:User Tiger62 has the right answer but the URL he included was truncated. Try this one:
Reply:I had the exact same thing just happen to my computer yesterday. It was after I updated Microsoft. Is that when you got the message? I tried everything to fix it. Now I don't get that message but instead everytime I open a program it says "Windows Installer, preparing to install" Microsoft sucks.
Reply:The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
This problem occurs when the following third-party applications are installed:
• Realtek HD Audio Control Panel
• ElsterFormular 2006/2007
• TUGZip
• CD-Tag
Download a fix from microsoft
http://www.microsoft.com/downloads/thank...
Reply:DLL is dynamic link library, if the error happens on an old machine and it is already been running well for awhile then i think it is great to check the hard disk for corrupted files which may cause some of the files to fail, otherwise perform a test on the memory as partial damage memory usually fails to load and execute file resulting in DLL failure.
Reply:I just got the same thng on mine, an ASUS. Its caused by the latest Microsoft update programs hogging memory (again). The DLL it's complaining about is the driver for your sound system. Go to the sound card (not compaq) web site and get the latest drivers.
"RTHDCPL.EXE- Illegal System DLL Relocation" comes up on start up?
The exact error is "The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occured because the DLL C:\WINDOWS\system32\HHCTRLOCX occupied an adress range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL." What is my problem and how do i fix it?
"RTHDCPL.EXE- Illegal System DLL Relocation" comes up on start up?
Dowload module available at following link:
http://support.microsoft.com/kb/935448/
Fixed the problem for me!
Reply:Here is the fix for it, I just had the same problem...now I don't :)
http://www.microsoft.com/downloads/detai...
Reply:what is my problej and how do if fix it?
Reply:you have a "virus" that is pretty tricky in that if you search for it you find links to sites that want to sell you software to remove it
sadly I too got it but I am still looking at how to remove it but if you want it to stop you can do the follwoing:
1. use msconfig and disable and click on teh startup tab
2. disable (uncheck) everything where teh command is NOT a path but an executable
for example the comamnd
"c:\blah\blah\blah" is OK
but
hexfgh.exe is not OK
now this is pretty generic but its ok for several reasons
1. you can recheck anything that you need
2. when you reboot the system will tell you that msconfig was modified and automatically open (so you can recheck anything that it turns out you need)
3. most legit programs do NOT do HGFHXBXG.exe but rather a path
once I figure out how to remove (the above steps just disables it) I will let you know
dougc
"RTHDCPL.EXE- Illegal System DLL Relocation" comes up on start up?
Dowload module available at following link:
http://support.microsoft.com/kb/935448/
Fixed the problem for me!
Reply:Here is the fix for it, I just had the same problem...now I don't :)
http://www.microsoft.com/downloads/detai...
Reply:what is my problej and how do if fix it?
Reply:you have a "virus" that is pretty tricky in that if you search for it you find links to sites that want to sell you software to remove it
sadly I too got it but I am still looking at how to remove it but if you want it to stop you can do the follwoing:
1. use msconfig and disable and click on teh startup tab
2. disable (uncheck) everything where teh command is NOT a path but an executable
for example the comamnd
"c:\blah\blah\blah" is OK
but
hexfgh.exe is not OK
now this is pretty generic but its ok for several reasons
1. you can recheck anything that you need
2. when you reboot the system will tell you that msconfig was modified and automatically open (so you can recheck anything that it turns out you need)
3. most legit programs do NOT do HGFHXBXG.exe but rather a path
once I figure out how to remove (the above steps just disables it) I will let you know
dougc
I hav got a problem with dll.. Help!!!?
i have got Windows Vista Home Premium with 1gb ram, and amd dual core processor tablet pc.....
Recently i noticed that cd/dvd programs dont autoplay/autorun....
-When i click autorun, it gave a message C:\windows\system32\autorungui.dll is missing
-I then installed the autorungui.dll in the specified folder from google
-Now, when i play the autorun file, it gives a message sayin "Found dll C:\windows....autorungui.dll but required function dllmessagebox is missing"
Any idea friends?
Wt do i need to do?
I hav got a problem with dll.. Help!!!?
Probably you have a older version of the DLL dllmessagebox.
Try to download a newer version (of the correct DLL). or the DLL you downloaded may be totally unrelated one. because there can be different DLLs with the same name.
Reply:sorry friend but i hate vista.
Recently i noticed that cd/dvd programs dont autoplay/autorun....
-When i click autorun, it gave a message C:\windows\system32\autorungui.dll is missing
-I then installed the autorungui.dll in the specified folder from google
-Now, when i play the autorun file, it gives a message sayin "Found dll C:\windows....autorungui.dll but required function dllmessagebox is missing"
Any idea friends?
Wt do i need to do?
I hav got a problem with dll.. Help!!!?
Probably you have a older version of the DLL dllmessagebox.
Try to download a newer version (of the correct DLL). or the DLL you downloaded may be totally unrelated one. because there can be different DLLs with the same name.
Reply:sorry friend but i hate vista.
Dll error on xp?
error reads
system dll user32dll was relocatedin memory
the app will not run properly
relocation occured because the dll c:\windows\system32\HHCTRL%26gt;OCX occupied another adressrangereserved for windowssystem dll
Dll error on xp?
That comes from a windows update you downloaded
Theres a fix at MS for that click this url and download.
http://support.microsoft.com/kb/935448
Reply:This web site will fix it for you: http://www.pcmightymax.net/cgi-bin/view....
Reply:Well, the reason is, during an upgrade from Windows NT 3.51 to Windows NT 4.0, the dll file in reference may not be upgraded. If for some reason this file is not updated to the 4.0 version and the User32.dll file is updated to the 4.0 version, the files conflict in memory. The dll loads in an area of memory in which User32.dll tries to load. User32.dll is then relocated in memory but fails.
Try support.microsoft.com, to solve this problem.
Reply:You're the 37th person I've helped with this problem. There is a windows security update that is causing this problem. The update is: KB925902
Go to control panel%26gt;%26gt;add or remove programs, checkmark the box at the top next to "show updates", scroll down towards the bottom, look for the above number next to a security update, click remove to uninstall it and restart pc. This will solve the problem.
you can change automatic updates option to "notify me, but don't download or install then" or it will keep trying to install later.
marguerite
system dll user32dll was relocatedin memory
the app will not run properly
relocation occured because the dll c:\windows\system32\HHCTRL%26gt;OCX occupied another adressrangereserved for windowssystem dll
Dll error on xp?
That comes from a windows update you downloaded
Theres a fix at MS for that click this url and download.
http://support.microsoft.com/kb/935448
Reply:This web site will fix it for you: http://www.pcmightymax.net/cgi-bin/view....
Reply:Well, the reason is, during an upgrade from Windows NT 3.51 to Windows NT 4.0, the dll file in reference may not be upgraded. If for some reason this file is not updated to the 4.0 version and the User32.dll file is updated to the 4.0 version, the files conflict in memory. The dll loads in an area of memory in which User32.dll tries to load. User32.dll is then relocated in memory but fails.
Try support.microsoft.com, to solve this problem.
Reply:You're the 37th person I've helped with this problem. There is a windows security update that is causing this problem. The update is: KB925902
Go to control panel%26gt;%26gt;add or remove programs, checkmark the box at the top next to "show updates", scroll down towards the bottom, look for the above number next to a security update, click remove to uninstall it and restart pc. This will solve the problem.
you can change automatic updates option to "notify me, but don't download or install then" or it will keep trying to install later.
marguerite
A vender has taken my memory dll (need to get it back or replaced by vender(vender ?? unknown to me.?
the page with this message. need system dll user 32 was relocated in memory . application will not run properly. (am older so not a computer wiz. all answers must be simpflied. dll c:/windows/system 32/hhc trl.ocx occupied on address range reserved for windows system dll's the vender supplying the dll should be contacted for a new dll. rthdcpl.exe-illegal system dll relocation. this message was received just this afternoon , have no idea of the group or people that is ocupping my memory dll. if i were to restore back say a week would this take care of this problem. i have also read up some on my up to date of dummies(what they have taken is this considered a cookie??i really need some answers ,any help will be so great. thanks again to the not so dummies ha ha ramona rhdh20032003@yahoo.com
A vender has taken my memory dll (need to get it back or replaced by vender(vender ?? unknown to me.?
http://support.microsoft.com/kb/935448/e...
A vender has taken my memory dll (need to get it back or replaced by vender(vender ?? unknown to me.?
http://support.microsoft.com/kb/935448/e...
What is a DLL?
When I start my 2 month old laptop it now tells me "The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL." What does all this mean? Fiona A
What is a DLL?
A DLL is a "Dynamic Link Library" and is basically just a support file for programs on your computer.
It gives the .exe file information it needs to complete it's operation.
Go to this link:
http://www.dll-files.com/dllindex/dll-fi...
It has a copy of the DLL file that has been moved. You will need to copy it to "C:\WINDOWS\system32\".
You might need to go into safe mode to copy it to the correct location.
tropical flowers
What is a DLL?
A DLL is a "Dynamic Link Library" and is basically just a support file for programs on your computer.
It gives the .exe file information it needs to complete it's operation.
Go to this link:
http://www.dll-files.com/dllindex/dll-fi...
It has a copy of the DLL file that has been moved. You will need to copy it to "C:\WINDOWS\system32\".
You might need to go into safe mode to copy it to the correct location.
tropical flowers
Dll help..error when I turn laptop on now?
RTHDCPL.EXE - illigal SYSTEM DLL relocation.
The system DLL user32.dll was relocated in memory.
The application will not run properly.
The relocation occured because the DLL
C:\WINDOWS\user32\HHCTRL.OCX
occupied an address reserved for Windows system DLLs
The vendor supplying the DLL should be contacted for New DLL
Dll help..error when I turn laptop on now?
Don't do a Windows repair. This is caused by a couple buggy Windows updates. Go here http://support.microsoft.com/kb/935448/ to see the explanation and a very small file to download to fix it. I did about 20 of these this week...
Reply:Hi,
Just do a "Windows Repair" this should fix your problem or go back to a restore point when your P.C was working correctly.
Reply:You're the 38th person I've helped with this problem. There is windows security update that's causing this file to be relocated in memory. The security update is : KB925902
Go to control panel%26gt;%26gt;add or remove programs checkmark the box at the top next to "show updates"scroll down towards the bottom look for the above number next to a security update, click remove to uninstall it, restart your pc.
Automatic updates will keep trying install this update again later if "automatic" is set, i changed mine to "notify me, but don't download or install them" option
The system DLL user32.dll was relocated in memory.
The application will not run properly.
The relocation occured because the DLL
C:\WINDOWS\user32\HHCTRL.OCX
occupied an address reserved for Windows system DLLs
The vendor supplying the DLL should be contacted for New DLL
Dll help..error when I turn laptop on now?
Don't do a Windows repair. This is caused by a couple buggy Windows updates. Go here http://support.microsoft.com/kb/935448/ to see the explanation and a very small file to download to fix it. I did about 20 of these this week...
Reply:Hi,
Just do a "Windows Repair" this should fix your problem or go back to a restore point when your P.C was working correctly.
Reply:You're the 38th person I've helped with this problem. There is windows security update that's causing this file to be relocated in memory. The security update is : KB925902
Go to control panel%26gt;%26gt;add or remove programs checkmark the box at the top next to "show updates"scroll down towards the bottom look for the above number next to a security update, click remove to uninstall it, restart your pc.
Automatic updates will keep trying install this update again later if "automatic" is set, i changed mine to "notify me, but don't download or install them" option
Rthdcpl.exe.illegal system dll relocation can anybody tell me why this keeps poping up on start up?
the system DLL user32.dll was relocated in memory. the application will not run properly. the relocation occurred because the DLL C:/windows\system32\HHCTRL.OCK occupied an address range reserved fo windows system Dll . the vendor supplying the DLL should be contacted for a new Dll ... How do you do this?
Rthdcpl.exe.illegal system dll relocation can anybody tell me why this keeps poping up on start up?
You are the 59th person I've helped w/this problem, with 100% results.
There is a windows security update that is causing this problem on alot of pc's,
Control panel%26gt;%26gt;add or remove, at the top checkmark the box next to "show updates", scroll down towards the bottom, look for security update: KB925902, click remove to uninstall it, and restart your pc.
NOTE: you may need to change your automatic updates settings, if it is set on "automatic", or it will try to install this update again later on.
Reply:http://support.microsoft.com/kb/935448/e...
Reply:It's an issue with Realtek audio drivers. Try reinstalling.
Rthdcpl.exe.illegal system dll relocation can anybody tell me why this keeps poping up on start up?
You are the 59th person I've helped w/this problem, with 100% results.
There is a windows security update that is causing this problem on alot of pc's,
Control panel%26gt;%26gt;add or remove, at the top checkmark the box next to "show updates", scroll down towards the bottom, look for security update: KB925902, click remove to uninstall it, and restart your pc.
NOTE: you may need to change your automatic updates settings, if it is set on "automatic", or it will try to install this update again later on.
Reply:http://support.microsoft.com/kb/935448/e...
Reply:It's an issue with Realtek audio drivers. Try reinstalling.
Rthdcpl.exe -illegal system dll relocation i get after i installed new xp security pack update?
i had a auto update for windows some security thing yesterday
and since then i get a error im runnin Xp with media
rthdcpl.exe -illegal system dll relocation
the system dll user.dll was relocated in memory.the application will not run properly.the relocation occurred because the dll C:\windows\system32\hhctrl.ocx occupied an address range reserved for windows system dlls.the vendor supplying the dll should be contacted for a new dll.
Rthdcpl.exe -illegal system dll relocation i get after i installed new xp security pack update?
happened to me yesterday...total pain in the you know what, try this http://support.microsoft.com/kb/935448/e...
if it doesnt completely sort it out, mail me via yahoo email and i will tell you the other way
Reply:As someone mentioned, I removed the troubled windows update from add/remove programs in the control panel, and I was happy for a moment because I stopped getting the same message that you are getting.
But soon after I restarted my computer, it got the same windows update again (security update 925902), and the problem started all over again.
As someone else mentioned, I went to Microsoft's link http://support.microsoft.com/kb/935448 and tried downloading a fix for this problem, but I got another error message that reads like this:
C:\Documents and Settings\Name of computer\Local Settings\Temporary Internet Files\Content.IE5\LEZ4NAHA\WindowsXP-KB9... is not a valid Win 32 application
Please help!
Reply:Try this to see if it will clean it up and particularly so, try this URL http://www.tune-up.com/products/tuneup-u... before anything else and after you make sure that your system is free of any Internet bugs.
HOW TO DO A THOROUGH CLEAN UP:
Before doing any of the maintenance steps outlined below make sure that your system is free from viruses and/or of any other undesirable Internet bugs, by running a thorough security scan of your machine.
Now, do the following as needed:
“I” (FOR WINDOWS XP-IE6)
While you are connected to the Internet do the following:
1. Click on tools ... Internet options. There you will see three buttons next to each other... “Delete Cookies” ... “Delete Files” and “Settings.” Also, below the settings button you will see another one “Clear history.”
2. Click on “settings” - go to “Edit” - Click on “select all” - Go to files, click delete and wait till all Internet trash files are gone.
3. Go back and click on “delete cookies” and wait till all cookies are gone
4. Go back and click on “Delete files,” put a check mark on the little white square shown on the small window that will open, click OK and wait for a little.
5. Go back and click on “Clear history”, click “yes” and you are done. Go to item “III” now.
ADDITIONAL INFO.: Here is how to clean website addresses from you IE6 browser bar: While you are connected to Internet, go to “Tools” … “Internet Options,” “Content” tab … “Auto Complete button” … click on “clear forms” and you are finished.
“II” (FOR WINDOWS XP-IE7):
Go to Start … Control Panel … Internet Options. Under “Browsing history” click “Delete” and then click “Delete all,” put a check mark in the little white square and then click “Yes” and you are done. Go to Item “III” now.
“III” (FOR BOTH WIN-IE6 AND WIN-IE7)
1. Do a check disk and a defrag, then restart your computer and see if the problem is resolved. It is assumed that you know how to do a check disc and disc difragmentation.
2. If the above steps don’t do the job, here is a little program that keeps your machine in shape and free from Windows micro-problems that lead to slowness and crashes:
Get on the web and go to http://www.tune-up.com/products/tuneup-u... download the free trial program, familiarize your self with it and use it to clean up your registry automatically along with a sort of other helpful and useful maintenance chores. It is an excellent little program and does wonders with PC maintenance tasks and I strongly recommend it! It works on the background on its own automatically.
3. After you are through with the above maintenance steps, go to Microsoft/Windows updates and download any and all available and/or applicable updates.
Hope this helps!
NDS
Reply:Certain third-party applications may not start, and you receive an error message when you start the computer: "Illegal System DLL Relocation"
http://support.microsoft.com/kb/935448
This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file.
and since then i get a error im runnin Xp with media
rthdcpl.exe -illegal system dll relocation
the system dll user.dll was relocated in memory.the application will not run properly.the relocation occurred because the dll C:\windows\system32\hhctrl.ocx occupied an address range reserved for windows system dlls.the vendor supplying the dll should be contacted for a new dll.
Rthdcpl.exe -illegal system dll relocation i get after i installed new xp security pack update?
happened to me yesterday...total pain in the you know what, try this http://support.microsoft.com/kb/935448/e...
if it doesnt completely sort it out, mail me via yahoo email and i will tell you the other way
Reply:As someone mentioned, I removed the troubled windows update from add/remove programs in the control panel, and I was happy for a moment because I stopped getting the same message that you are getting.
But soon after I restarted my computer, it got the same windows update again (security update 925902), and the problem started all over again.
As someone else mentioned, I went to Microsoft's link http://support.microsoft.com/kb/935448 and tried downloading a fix for this problem, but I got another error message that reads like this:
C:\Documents and Settings\Name of computer\Local Settings\Temporary Internet Files\Content.IE5\LEZ4NAHA\WindowsXP-KB9... is not a valid Win 32 application
Please help!
Reply:Try this to see if it will clean it up and particularly so, try this URL http://www.tune-up.com/products/tuneup-u... before anything else and after you make sure that your system is free of any Internet bugs.
HOW TO DO A THOROUGH CLEAN UP:
Before doing any of the maintenance steps outlined below make sure that your system is free from viruses and/or of any other undesirable Internet bugs, by running a thorough security scan of your machine.
Now, do the following as needed:
“I” (FOR WINDOWS XP-IE6)
While you are connected to the Internet do the following:
1. Click on tools ... Internet options. There you will see three buttons next to each other... “Delete Cookies” ... “Delete Files” and “Settings.” Also, below the settings button you will see another one “Clear history.”
2. Click on “settings” - go to “Edit” - Click on “select all” - Go to files, click delete and wait till all Internet trash files are gone.
3. Go back and click on “delete cookies” and wait till all cookies are gone
4. Go back and click on “Delete files,” put a check mark on the little white square shown on the small window that will open, click OK and wait for a little.
5. Go back and click on “Clear history”, click “yes” and you are done. Go to item “III” now.
ADDITIONAL INFO.: Here is how to clean website addresses from you IE6 browser bar: While you are connected to Internet, go to “Tools” … “Internet Options,” “Content” tab … “Auto Complete button” … click on “clear forms” and you are finished.
“II” (FOR WINDOWS XP-IE7):
Go to Start … Control Panel … Internet Options. Under “Browsing history” click “Delete” and then click “Delete all,” put a check mark in the little white square and then click “Yes” and you are done. Go to Item “III” now.
“III” (FOR BOTH WIN-IE6 AND WIN-IE7)
1. Do a check disk and a defrag, then restart your computer and see if the problem is resolved. It is assumed that you know how to do a check disc and disc difragmentation.
2. If the above steps don’t do the job, here is a little program that keeps your machine in shape and free from Windows micro-problems that lead to slowness and crashes:
Get on the web and go to http://www.tune-up.com/products/tuneup-u... download the free trial program, familiarize your self with it and use it to clean up your registry automatically along with a sort of other helpful and useful maintenance chores. It is an excellent little program and does wonders with PC maintenance tasks and I strongly recommend it! It works on the background on its own automatically.
3. After you are through with the above maintenance steps, go to Microsoft/Windows updates and download any and all available and/or applicable updates.
Hope this helps!
NDS
Reply:Certain third-party applications may not start, and you receive an error message when you start the computer: "Illegal System DLL Relocation"
http://support.microsoft.com/kb/935448
This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file.
How can i fix this DLL problem??
Everytime i try to install updates for any of my security programmes like norton antivirus (live update) i see this error message-
COHRER~1.EXE-illegal system DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\user32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
How can i fix this DLL problem??
Problem caused by a XP update patch.
Try Microsoft Update from your start menu.
Reply:Many of my customers have had similar problems, the Hotfix is available for download from www.support.microsoft.com, the full link is below.
http://support.microsoft.com/kb/935448/e...
This will correct the problem in seconds.
Reply:Type DLL relocation in the "search for answers box" see how many people have asked the same question
Reply:go to microsoft download page and download fix KB935448 it should sort out your problem.
Reply:http://support.microsoft.com/kb/935448
common worldwide problem these last few weeks
sound cards
COHRER~1.EXE-illegal system DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\user32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
How can i fix this DLL problem??
Problem caused by a XP update patch.
Try Microsoft Update from your start menu.
Reply:Many of my customers have had similar problems, the Hotfix is available for download from www.support.microsoft.com, the full link is below.
http://support.microsoft.com/kb/935448/e...
This will correct the problem in seconds.
Reply:Type DLL relocation in the "search for answers box" see how many people have asked the same question
Reply:go to microsoft download page and download fix KB935448 it should sort out your problem.
Reply:http://support.microsoft.com/kb/935448
common worldwide problem these last few weeks
sound cards
What is an "illegal DLL"?
I keep getting the following message when I turn on my computer:
inetsrv.exe - illegal system dll relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\SHELL32.dll occupied an address range reserved for Windows DLLs. The vendor supplying the DLL should be contacted for a new DLL.
I get the same message when I load my iTunes and my Last.FM plug-in fails to load.
Is this a virus? And how can I remove it?
What is an "illegal DLL"?
there is a bad security update causing this problem on alot of pc's.
In control panel%26gt;%26gt;add or remove,at the top checkmark "show updates", scroll down towards the bottom, look for security update KB925902,click remove to uninstall it, and restart your pc.
Reply:http://support.microsoft.com/kb/935448/
You need the patch from Microsoft its just a DLL error.
Download the 935448 package now.
CAUSE
This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file.
inetsrv.exe - illegal system dll relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\SHELL32.dll occupied an address range reserved for Windows DLLs. The vendor supplying the DLL should be contacted for a new DLL.
I get the same message when I load my iTunes and my Last.FM plug-in fails to load.
Is this a virus? And how can I remove it?
What is an "illegal DLL"?
there is a bad security update causing this problem on alot of pc's.
In control panel%26gt;%26gt;add or remove,at the top checkmark "show updates", scroll down towards the bottom, look for security update KB925902,click remove to uninstall it, and restart your pc.
Reply:http://support.microsoft.com/kb/935448/
You need the patch from Microsoft its just a DLL error.
Download the 935448 package now.
CAUSE
This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file.
Problem with user32.dll can anyone help me. kindly please read the detail of my question.?
I have the received the identical message on an XP system - "The system DLL user32.dll was relocated in memory. The application will not work properly. The reolocation occurred becasue the DLL C:\\WINDOWS\\SYSTEM32\\HHCTRL.OCX occupied an address range reserved for Windows system DLL. The vendor supplying the DLL should be contacted for a new DLL." Is there a quick solution - Thanks
Problem with user32.dll can anyone help me. kindly please read the detail of my question.?
i also had this f.cking problem and visit microsoft com and foolowed the instructions but it did'nt f'kn. worked for me. Then i did it my way :) as below :
__ Uninstall the updates KB928843 and KB925902 by using Add/Remove Programs.
(if you just put a tick on show updates u can see them in hte list.)
__ Restart Windows.
__ Download and Reinstall the update KB935448 from the link below.
http://www.microsoft.com/downloads/detai...
__ Restart Windows again.
__ Now say "F.ck u Bill Gates!"
Reply:thank you it worked i did it and it fixed it thank you so much Report It
Reply:Try this link from microsoft
http://support.microsoft.com/kb/165152
Problem with user32.dll can anyone help me. kindly please read the detail of my question.?
i also had this f.cking problem and visit microsoft com and foolowed the instructions but it did'nt f'kn. worked for me. Then i did it my way :) as below :
__ Uninstall the updates KB928843 and KB925902 by using Add/Remove Programs.
(if you just put a tick on show updates u can see them in hte list.)
__ Restart Windows.
__ Download and Reinstall the update KB935448 from the link below.
http://www.microsoft.com/downloads/detai...
__ Restart Windows again.
__ Now say "F.ck u Bill Gates!"
Reply:thank you it worked i did it and it fixed it thank you so much Report It
Reply:Try this link from microsoft
http://support.microsoft.com/kb/165152
RTHDCPL.EXE-Illegal System DLL Relocation. What does this message mean and how can i fix it?
This is the message:
RTHDCPL.EXE-Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
What's a DLL etc and how do i fix it?
Also on a completely different subject what's an MMORPG, I know what the RPG bit means but what's the MMO?
RTHDCPL.EXE-Illegal System DLL Relocation. What does this message mean and how can i fix it?
Patch is available at http://support.microsoft.com/kb/935448/.... . The problem was caused by yesterdays update.
Hope this helps.
MMORPG Massive Multiplayer Online Role Playing Game
Reply:microsoft has a solution
http://support.microsoft.com/kb/935448/
Reply:i really think sanjay for answering this question i have had the same problem and i went and got the patch and ty for asking this question tyvm
Reply:This will sort it out
http://update.microsoft.com/windowsupdat...
Reply:rthdcpl.exe is a process belonging to the Realtek HD Audio Control Panel and is bundled alongside Realtek sound cards and audio hardware.
dont know how to fix it but that is what it says is the message you are getting
RTHDCPL.EXE-Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
What's a DLL etc and how do i fix it?
Also on a completely different subject what's an MMORPG, I know what the RPG bit means but what's the MMO?
RTHDCPL.EXE-Illegal System DLL Relocation. What does this message mean and how can i fix it?
Patch is available at http://support.microsoft.com/kb/935448/.... . The problem was caused by yesterdays update.
Hope this helps.
MMORPG Massive Multiplayer Online Role Playing Game
Reply:microsoft has a solution
http://support.microsoft.com/kb/935448/
Reply:i really think sanjay for answering this question i have had the same problem and i went and got the patch and ty for asking this question tyvm
Reply:This will sort it out
http://update.microsoft.com/windowsupdat...
Reply:rthdcpl.exe is a process belonging to the Realtek HD Audio Control Panel and is bundled alongside Realtek sound cards and audio hardware.
dont know how to fix it but that is what it says is the message you are getting
Re DLL what the heck is a DLL.?
Just received this message."the system DLL user 32dll was relocated in memory the application will not run properly,it occured because DLL C:\ Windows\system32HHCTRL.ocx occupied address range reserved for Windows system DLLs" it then says contact vendor for new DLL.Now I can't get rid of this message,and what the heck is a DLL.Thanks for any help.
Re DLL what the heck is a DLL.?
check this link to see if fixes problem
http://support.microsoft.com/kb/935448
and What is a DLL?
Short for Dynamic Link Library, a library of executable functions or data that can be used by a Windows application. Typically, a DLL provides one or more particular functions and a program accesses the functions by creating either a static or dynamic link to the DLL. A static link remains constant during program execution while a dynamic link is created by the program as needed. DLLs can also contain just data. DLL files usually end with the extension .dll,.exe., drv, or .fon.
A DLL can be used by several applications at the same time. Some DLLs are provided with the Windows operating system and available for any Windows application. Other DLLs are written for a particular application and are loaded with the application.
2) Short for Delay Locked Loop, Delay-Locked Loop (DLL) supports high-bandwidth data rates between devices. These DLLs are circuits that provide zero propagation delay, low-clock skew between output clock signals throughout a device, and advanced clock domain control. These dedicated DLLs can be used to implement several circuits that improve and simplify system level design
--------------------------------------...
A DLL is a library that contains code and data that can be used by more than one program at the same time. For example, in Windows operating systems, the Comdlg32 DLL performs common dialog box related functions. Therefore, each program can use the functionality that is contained in this DLL to implement an Open dialog box. This helps promote code reuse and efficient memory usage.
By using a DLL, a program can be modularized into separate components. For example, an accounting program may be sold by module. Each module can be loaded into the main program at run time if that module is installed. Because the modules are separate, the load time of the program is faster, and a module is only loaded when that functionality is requested.
Additionally, updates are easier to apply to each module without affecting other parts of the program. For example, you may have a payroll program, and the tax rates change each year. When these changes are isolated to a DLL, you can apply an update without needing to build or install the whole program again.
Reply:Dynamic Link Library
Reply:http://support.microsoft.com/kb/935448
Reply:"This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file."
Please go to http://support.microsoft.com/kb/935448 and download and install the patch
liama-song
Re DLL what the heck is a DLL.?
check this link to see if fixes problem
http://support.microsoft.com/kb/935448
and What is a DLL?
Short for Dynamic Link Library, a library of executable functions or data that can be used by a Windows application. Typically, a DLL provides one or more particular functions and a program accesses the functions by creating either a static or dynamic link to the DLL. A static link remains constant during program execution while a dynamic link is created by the program as needed. DLLs can also contain just data. DLL files usually end with the extension .dll,.exe., drv, or .fon.
A DLL can be used by several applications at the same time. Some DLLs are provided with the Windows operating system and available for any Windows application. Other DLLs are written for a particular application and are loaded with the application.
2) Short for Delay Locked Loop, Delay-Locked Loop (DLL) supports high-bandwidth data rates between devices. These DLLs are circuits that provide zero propagation delay, low-clock skew between output clock signals throughout a device, and advanced clock domain control. These dedicated DLLs can be used to implement several circuits that improve and simplify system level design
--------------------------------------...
A DLL is a library that contains code and data that can be used by more than one program at the same time. For example, in Windows operating systems, the Comdlg32 DLL performs common dialog box related functions. Therefore, each program can use the functionality that is contained in this DLL to implement an Open dialog box. This helps promote code reuse and efficient memory usage.
By using a DLL, a program can be modularized into separate components. For example, an accounting program may be sold by module. Each module can be loaded into the main program at run time if that module is installed. Because the modules are separate, the load time of the program is faster, and a module is only loaded when that functionality is requested.
Additionally, updates are easier to apply to each module without affecting other parts of the program. For example, you may have a payroll program, and the tax rates change each year. When these changes are isolated to a DLL, you can apply an update without needing to build or install the whole program again.
Reply:Dynamic Link Library
Reply:http://support.microsoft.com/kb/935448
Reply:"This problem may occur after you install security update 925902 (MS07-017) and security update 928843 (MS07-008). The Hhctrl.ocx file that is included in security update 928843 and the User32.dll file that is included in security update 925902 have conflicting base addresses. This problem occurs if the program loads the Hhctrl.ocx file before it loads the User32.dll file."
Please go to http://support.microsoft.com/kb/935448 and download and install the patch
liama-song
Error Message - Illegal System DLL Relocation?
Every time I attempt to install Opera or AutoRoute 2005, the installer program gives me the following error message
--------------------------------------...
Error in Application - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation error occured because thee DLL "C:\WINNT\System32\Shell32.dll occupied an address range reserved for Windows System DLL's. The vendor suppying the DLL should be contacted for a new DLL.
--------------------------------------...
I seriousely need some help with this. This is an error I really want to get rid of.
Error Message - Illegal System DLL Relocation?
You need this hotfix.
http://www.microsoft.com/downloads/detai...
Reply:go to the microsoft site the fix is there for this loads had it recently
Reply:You can delete Shell32.dll from your computer and that might sort out the problem.
Reply:DO NOT DELETE shell32.dll it is a system file.
Windows keeps two copies of dll files in.
C:\Windows\System32
C:\Windows\System32\DLLcache
Possibly there is a conflict in that Autoroute came with a newer version of that dll file but Windows insists on using the old version that resides in cache?
Reply:I had the same thing a couple of weeks ago, it appeared from nowhere, quite unexpectedly. I ran Windows updates and it cleared itself. Not being of a technical nature, I had no idea what it was but it's gone and I'm now a happy bunny once more. Hope that helped.
--------------------------------------...
Error in Application - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation error occured because thee DLL "C:\WINNT\System32\Shell32.dll occupied an address range reserved for Windows System DLL's. The vendor suppying the DLL should be contacted for a new DLL.
--------------------------------------...
I seriousely need some help with this. This is an error I really want to get rid of.
Error Message - Illegal System DLL Relocation?
You need this hotfix.
http://www.microsoft.com/downloads/detai...
Reply:go to the microsoft site the fix is there for this loads had it recently
Reply:You can delete Shell32.dll from your computer and that might sort out the problem.
Reply:DO NOT DELETE shell32.dll it is a system file.
Windows keeps two copies of dll files in.
C:\Windows\System32
C:\Windows\System32\DLLcache
Possibly there is a conflict in that Autoroute came with a newer version of that dll file but Windows insists on using the old version that resides in cache?
Reply:I had the same thing a couple of weeks ago, it appeared from nowhere, quite unexpectedly. I ran Windows updates and it cleared itself. Not being of a technical nature, I had no idea what it was but it's gone and I'm now a happy bunny once more. Hope that helped.
DLL system error?
Every time I start my PC i get this message: "The system DLL user32.dll was relocated in memory. The application will not run properly.The relocation occured because DLL c:\windows\system32\HHCTRL.ocx occupied an address range reserved for Windows system DLLs. The Vendor supplying the DLL should be contacted for new DLL."
Any ideas or suggestions? I dont even know which program this necessarily refers to,so I dont know what "vendor" to contact.
Any ideas or suggestions? I dont even know which program this necessarily refers to,so I dont know what "vendor" to contact.
RTHDCPL.EXE-Illegal System DLL Relocation?
I just got Windows security update 925902, and I started getting this error message:
RTHDCPL.EXE-Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
So, I removed the update from add/remove programs from Control Panel. And I was happy that I stoped getting the message whenever I started my computer.
BUT NOT SO FAST. The computer gets the same windows update that caused the problem. So, I went to http://support.microsoft.com/kb/935448 to get a fix. But I received yet another error message that reads like this:
C:\Documents and Settings\Name of computer\Local Settings\Temporary Internet Files\Content.IE5\LEZ4NAHA\WindowsXP-KB9... is not a valid Win 32 application
Please help!
RTHDCPL.EXE-Illegal System DLL Relocation?
It is NOT a virus! And don't let anyone tell you otherwise.
You must have updated your Windows with the emergency .ani patch in the past 2 days. Well that patch now needs a patch! Go to Windows Update and get the patch for the patch and that information box will be gone.
Full information about this latest Microsoft screw-up is here:
http://blogs.pcworld.com/tipsandtweaks/a...
Good luck.
Reply:Here is the fix:
http://www.microsoft.com/downloads/detai...
Reply:It's part of the audio system on your computer.
You need to repair it.
.
RTHDCPL.EXE-Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
So, I removed the update from add/remove programs from Control Panel. And I was happy that I stoped getting the message whenever I started my computer.
BUT NOT SO FAST. The computer gets the same windows update that caused the problem. So, I went to http://support.microsoft.com/kb/935448 to get a fix. But I received yet another error message that reads like this:
C:\Documents and Settings\Name of computer\Local Settings\Temporary Internet Files\Content.IE5\LEZ4NAHA\WindowsXP-KB9... is not a valid Win 32 application
Please help!
RTHDCPL.EXE-Illegal System DLL Relocation?
It is NOT a virus! And don't let anyone tell you otherwise.
You must have updated your Windows with the emergency .ani patch in the past 2 days. Well that patch now needs a patch! Go to Windows Update and get the patch for the patch and that information box will be gone.
Full information about this latest Microsoft screw-up is here:
http://blogs.pcworld.com/tipsandtweaks/a...
Good luck.
Reply:Here is the fix:
http://www.microsoft.com/downloads/detai...
Reply:It's part of the audio system on your computer.
You need to repair it.
.
The system DLL user32.dll?
The system dll user32.dll was relocated in memory. The application will not run properly.
The relocation occurred because the dll C:\\windows\system32\shell32.dll occupied an
address range reserved for windows system dlls. the vendor supplying the dll should be
contated for a new dll.
The system DLL user32.dll?
insert the windows installation cd and select "repair"
garden state
The relocation occurred because the dll C:\\windows\system32\shell32.dll occupied an
address range reserved for windows system dlls. the vendor supplying the dll should be
contated for a new dll.
The system DLL user32.dll?
insert the windows installation cd and select "repair"
garden state
Illegal System DLL Relocation???? what is this thing????
application_executable_name - Illegal System DLL Relocation
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\shell32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
i have being facing this problem from a month! every time i try to install something or try to open any program this error comes up.... can anyone help me to solve this thing????
Illegal System DLL Relocation???? what is this thing????
The problem is related windows dll files what i can suggest is that you restore your windows to the earlier time when it was workin or take the backup of the system and format the system and reinstall the OS.
Reply:http://support.microsoft.com?default.asp...
The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\shell32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
i have being facing this problem from a month! every time i try to install something or try to open any program this error comes up.... can anyone help me to solve this thing????
Illegal System DLL Relocation???? what is this thing????
The problem is related windows dll files what i can suggest is that you restore your windows to the earlier time when it was workin or take the backup of the system and format the system and reinstall the OS.
Reply:http://support.microsoft.com?default.asp...
Shell32.dll error, please help!?
I recently installed a flyakiteosx which transform my XP to become an OSX like interface,.. but I encountered a problem with the calculator where whenever I launch it, it trigger an error message
error 'calc.exe - illegal system DLL relocation, The system DLL
user32.dll was relocated in memory. The application will not run properly.
The relocation occured because the DLL c:\windows\system32\shell32.dll
occupied an address range reserved for windows system DLLs. The vendor
supplying the DLL should be contacted for new DLL.'
Can you please help me to get back my calculator?
Shell32.dll error, please help!?
I had the same error when i start up my laptop, but not due to installing the flyakiteosx (i still do not know what caused the error). Anyway i went to Windows update, updated all the necessary (critical) updates that Windows recommended (after it scans my laptop for the necessary ones), my laptop did not show this error anymore when i start up it up. Hope it helps.
Reply:Download it from here... http://www.dll-files.com/dllindex/dll-fi...
Reply:That caused there is an error while you installing OS. Try to repair or reinstal when needed
Reply:FORMAT IT......................................
error 'calc.exe - illegal system DLL relocation, The system DLL
user32.dll was relocated in memory. The application will not run properly.
The relocation occured because the DLL c:\windows\system32\shell32.dll
occupied an address range reserved for windows system DLLs. The vendor
supplying the DLL should be contacted for new DLL.'
Can you please help me to get back my calculator?
Shell32.dll error, please help!?
I had the same error when i start up my laptop, but not due to installing the flyakiteosx (i still do not know what caused the error). Anyway i went to Windows update, updated all the necessary (critical) updates that Windows recommended (after it scans my laptop for the necessary ones), my laptop did not show this error anymore when i start up it up. Hope it helps.
Reply:Download it from here... http://www.dll-files.com/dllindex/dll-fi...
Reply:That caused there is an error while you installing OS. Try to repair or reinstal when needed
Reply:FORMAT IT......................................
DLL error on Startup! HELP ME?
Application popup: RTHDCPL.EXE - Illegal System DLL Relocation : The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
DLL error on Startup! HELP ME?
Try this first:
Go to Start | Run and type in:
cmd
In the command window type this:
regsvr32 hhctrl.ocx
This will re-register the OCX
I just found out what caused this on my machine:
Go to Control Panel | Add or Remove Programs and check the "Show Updates" box. Scroll down and remove Windows XP Security Update KB925902. Reboot and see if that helps. You can always reinstall it later if it doesn't work
Reply:Microsoft updates! Ya gotta love 'em. Report It
Reply:I would also consider going to one of the following dll sites and searching for the missing DLLs
http://free-dlls.com
http://dllcity.com
Thats helped me in the past. Report It
Reply:download the HHCTRL.OCX file again and replace it in the system32 folder
DLL error on Startup! HELP ME?
Try this first:
Go to Start | Run and type in:
cmd
In the command window type this:
regsvr32 hhctrl.ocx
This will re-register the OCX
I just found out what caused this on my machine:
Go to Control Panel | Add or Remove Programs and check the "Show Updates" box. Scroll down and remove Windows XP Security Update KB925902. Reboot and see if that helps. You can always reinstall it later if it doesn't work
Reply:Microsoft updates! Ya gotta love 'em. Report It
Reply:I would also consider going to one of the following dll sites and searching for the missing DLLs
http://free-dlls.com
http://dllcity.com
Thats helped me in the past. Report It
Reply:download the HHCTRL.OCX file again and replace it in the system32 folder
Computer problem: DLL>RTHDCPLEXE-illegal System. System DLL Relocation?
Please help. This is almost new laptop.DLL%26gt;RTHDCPLEXE-illegal System DLL Relocation. The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\SYSTEM32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for an new DLL.
Computer problem: DLL%26gt;RTHDCPLEXE-illegal System. System DLL Relocation?
this was a discovered issue recently found by microsoft concering a update , how ever microsoft has issued a fix
http://support.microsoft.com/kb/935448/e...
Reply:Cause:
The application that is causing this DLL error is Realtek's HD Audio Control Panel (RTHDCPL.EXE).
Solution:
Download the latest driver package on http://www.realtek.com.tw/downloads/... and re-install the package. After rebooting, the DLL error should be resolved and the error will not appear anymore.
funeral flowers
Computer problem: DLL%26gt;RTHDCPLEXE-illegal System. System DLL Relocation?
this was a discovered issue recently found by microsoft concering a update , how ever microsoft has issued a fix
http://support.microsoft.com/kb/935448/e...
Reply:Cause:
The application that is causing this DLL error is Realtek's HD Audio Control Panel (RTHDCPL.EXE).
Solution:
Download the latest driver package on http://www.realtek.com.tw/downloads/... and re-install the package. After rebooting, the DLL error should be resolved and the error will not appear anymore.
funeral flowers
DLL error! HELP ME?
Application popup: RTHDCPL.EXE - Illegal System DLL Relocation : The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\HHCTRL.OCX occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
Thats the error i got on startup, what do i do to fix this??
DLL error! HELP ME?
LMAO!
You've fixed it yourself?
Good for you!
Cheers!
Simon Templar
Reply:Here is the fix
http://www.microsoft.com/downloads/detai...
Reply:I had exactly the same problem. I blame Microsoft who issue their updates on the first Tuesday in the month. I have asked Microsft what they are up to but without a response as yet.
The error message continues to show on every start up!
Cheers
Reply:http://translate.google.com/translate?u=...
http://help.isu.edu/index.php?action=kno...
Reply:what windows you are using?...i have encountered a DLL problem before...missing DLL and it didn't allowed me to acces my windows...i inserted my windowsXP installation disk and clicked repair and it solved the problem...
just shared my experience...hope that will work for you also:)
Reply:http://support.microsoft.com/kb/935448/e...
Reply:how did you fix it as i have the same problem
Thats the error i got on startup, what do i do to fix this??
DLL error! HELP ME?
LMAO!
You've fixed it yourself?
Good for you!
Cheers!
Simon Templar
Reply:Here is the fix
http://www.microsoft.com/downloads/detai...
Reply:I had exactly the same problem. I blame Microsoft who issue their updates on the first Tuesday in the month. I have asked Microsft what they are up to but without a response as yet.
The error message continues to show on every start up!
Cheers
Reply:http://translate.google.com/translate?u=...
http://help.isu.edu/index.php?action=kno...
Reply:what windows you are using?...i have encountered a DLL problem before...missing DLL and it didn't allowed me to acces my windows...i inserted my windowsXP installation disk and clicked repair and it solved the problem...
just shared my experience...hope that will work for you also:)
Reply:http://support.microsoft.com/kb/935448/e...
Reply:how did you fix it as i have the same problem
Why do I get this error when I turn my computer on: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
I keep getting the error, but when I search for files progra~1 or mywebs~1 the windows explorer shuts down and gives me an error. What is it, and how do I stop it?
Why do I get this error when I turn my computer on: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
You should get a thorough virus scan done. This sounds like an Internet Explorer toolbar exploit.
Reply:This issue can be caused by any of the following possibilities.
1. Hard disk drive is short on available disk space.
2. Several software programs have been installed/uninstalled leaving behind bad files and/or confusing the software.
3. Data Corruption.
4. Computer is overheating.
5. Bad Hardware.
Below are steps for Microsoft Windows that should help speed up the computer or determine why the computer is running slow.
1. If you have a hard disk drive that is 2GB or smaller, ensure that there is at least 200MB of hard disk drive space free. If you have a hard drive larger than this size, verify that there is at least 500MB of free hard disk space. This available space allows the computer to have room for the swap file to increase in size as well as room for temporary files.
2. Run Scandisk or something equivalent to help ensure that there is nothing physically wrong with the computer hard disk drive.
3. Run Defrag to help ensure that data is arranged in the best possible order.
4. Remove or disable any or programs that automatically start each time the computer boots.
5. Verify that the device manager has no conflicts, but if conflicts are present, resolve them.
6. If you have Windows XP try deleting all files in the prefetch directory. These are prefetch files and can lower system resources if loading programs no longer being used.
7. Try running through the basic troubleshooting steps for your operating system.
8. Make sure your computer and processor is not overheating, excessive heat can cause a significant decrease in computer performance some processors will even lower the speed of the processor automatically to help compensate for the heat related issues.
9. Finally, if none of the above solutions resolve your issues, it is recommended that you either reinstall Windows or erase everything and then start over.
Go to: http://tp5pro.com/registrycleaner.htm
This may help!
Why do I get this error when I turn my computer on: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
You should get a thorough virus scan done. This sounds like an Internet Explorer toolbar exploit.
Reply:This issue can be caused by any of the following possibilities.
1. Hard disk drive is short on available disk space.
2. Several software programs have been installed/uninstalled leaving behind bad files and/or confusing the software.
3. Data Corruption.
4. Computer is overheating.
5. Bad Hardware.
Below are steps for Microsoft Windows that should help speed up the computer or determine why the computer is running slow.
1. If you have a hard disk drive that is 2GB or smaller, ensure that there is at least 200MB of hard disk drive space free. If you have a hard drive larger than this size, verify that there is at least 500MB of free hard disk space. This available space allows the computer to have room for the swap file to increase in size as well as room for temporary files.
2. Run Scandisk or something equivalent to help ensure that there is nothing physically wrong with the computer hard disk drive.
3. Run Defrag to help ensure that data is arranged in the best possible order.
4. Remove or disable any or programs that automatically start each time the computer boots.
5. Verify that the device manager has no conflicts, but if conflicts are present, resolve them.
6. If you have Windows XP try deleting all files in the prefetch directory. These are prefetch files and can lower system resources if loading programs no longer being used.
7. Try running through the basic troubleshooting steps for your operating system.
8. Make sure your computer and processor is not overheating, excessive heat can cause a significant decrease in computer performance some processors will even lower the speed of the processor automatically to help compensate for the heat related issues.
9. Finally, if none of the above solutions resolve your issues, it is recommended that you either reinstall Windows or erase everything and then start over.
Go to: http://tp5pro.com/registrycleaner.htm
This may help!
I have a error message all the time at start up : C:\Program Files\Wild Tangent\Apps\CDA\cda Engine 0400.dll
I would like to know how to fix it.
I have a error message all the time at start up : C:\Program Files\Wild Tangent\Apps\CDA\cda Engine 0400.dll
(1) If you have not already scanned your comp with spybot http://www.safer-networking.org/en/downl... do that now .Update it and then run it so it gets rid of all the spyware and trojans in safe mode http://www.bleepingcomputer.com/tutorial...
(2) Do an online virus scan to check if you still have viruses on your computer. And let us know if the online virus scan still finds any virus or spyware .
http://onecare.live.com/site/en-us/defau...
If you do not have firefox get it now and use it instead of internet explorer so you dont get any more spyware http://securitynewsfromthenet.blogspot.c...
Reply:It's a spam/virus on your computer.
Get Windows Defender or Ad-Aware SE Personal at www.download.com. or you can google search them by the names.
I have a error message all the time at start up : C:\Program Files\Wild Tangent\Apps\CDA\cda Engine 0400.dll
(1) If you have not already scanned your comp with spybot http://www.safer-networking.org/en/downl... do that now .Update it and then run it so it gets rid of all the spyware and trojans in safe mode http://www.bleepingcomputer.com/tutorial...
(2) Do an online virus scan to check if you still have viruses on your computer. And let us know if the online virus scan still finds any virus or spyware .
http://onecare.live.com/site/en-us/defau...
If you do not have firefox get it now and use it instead of internet explorer so you dont get any more spyware http://securitynewsfromthenet.blogspot.c...
Reply:It's a spam/virus on your computer.
Get Windows Defender or Ad-Aware SE Personal at www.download.com. or you can google search them by the names.
Why would my computer tell me it can't find this file- C:\Docume~1\User\Locals~1\Temp... ?
I just bought a tascam 144 USB 2.0 Audio/Midi Interface. It came with Cubase LE and Giga Studio 3.0 software I downloaded and this error seems to come up.
Why would my computer tell me it can't find this file- C:\Docume~1\User\Locals~1\Temp... ?
My first suggestion would be to go and clean your temp files out. Then try again.
floral design
Why would my computer tell me it can't find this file- C:\Docume~1\User\Locals~1\Temp... ?
My first suggestion would be to go and clean your temp files out. Then try again.
floral design
My computer hangs when i scan it on the file----c\program files\common files\system\MSMAPI\1033\MSMAP...
it always hangs..whenever i try to scan for viruses..i m using a mcfee free edition
My computer hangs when i scan it on the file----c\program files\common files\system\MSMAPI\1033\MSMAP...
this should help
My computer hangs when i scan it on the file----c\program files\common files\system\MSMAPI\1033\MSMAP...
this should help
Error comes up on my desktop when i boot the computer up C:\PROGRA~1\MYWEBS~1\bar\2.bin...
how can i get rid of it and what is it?
Error comes up on my desktop when i boot the computer up C:\PROGRA~1\MYWEBS~1\bar\2.bin...
It was a piece of spyware that you probably got rid of when you ran a scan of your machine.
To get rid of it, you need to do the following:
Click start
Click run
type msconfig
click the startup tab
locate the line about what you are looking for (i.e. ...MYWEBS~1..) and uncheck it.
Click apply
then reboot
When the machine reboots it will give you a box with a message that you change settings, check the box and click ok.
Thats it. The message will not appear any more. If it does, then you uncheck the incorrect one, and just try again.
Reply:My best guess that it is a spy-ware...
Try Microsoft's new spy ware program (Windows Defender)
it is free
and you'll find it at the Microsoft genuine Advantage page
www.Microsoft.com
Reply:go to start click run then type in chkdsk then hit enter see if that helps
chelsea flower show
Error comes up on my desktop when i boot the computer up C:\PROGRA~1\MYWEBS~1\bar\2.bin...
It was a piece of spyware that you probably got rid of when you ran a scan of your machine.
To get rid of it, you need to do the following:
Click start
Click run
type msconfig
click the startup tab
locate the line about what you are looking for (i.e. ...MYWEBS~1..) and uncheck it.
Click apply
then reboot
When the machine reboots it will give you a box with a message that you change settings, check the box and click ok.
Thats it. The message will not appear any more. If it does, then you uncheck the incorrect one, and just try again.
Reply:My best guess that it is a spy-ware...
Try Microsoft's new spy ware program (Windows Defender)
it is free
and you'll find it at the Microsoft genuine Advantage page
www.Microsoft.com
Reply:go to start click run then type in chkdsk then hit enter see if that helps
chelsea flower show
Can anyone help in getting rid of this error message: error loading C:\PROGRA~1\MYWEBS~1\bar\4.bin...
Everytime I boot my computer,(laptop)at startup I will get this error message. It is very annoying! Also when I put the computer to hybernate or in standbye mode,when it is turned back on the screen remains black like it is powered off, and would not show anything not until it i turned off an rebooted again. Does the above error message has something to do with that problem. Someone please help!
Can anyone help in getting rid of this error message: error loading C:\PROGRA~1\MYWEBS~1\bar\4.bin...
I like how Cuite answers these questions and sometimes has no clue. Sounds like an advertisement she gave there...haha! I wonder if she gets any kickback from the Company.
Anyway,
You have spyware.
Mywebsearch bar is adware.
Get Adaware, Install/Update and run it to remove spyware.
You can also go to your Add/Remove program list and uninstall any programs that have Toolbar, or Searchbar.
Reply:System Mechanic will fixed your pc from a system crash
no need to format the hard drive :: System Mechanic gets your system back
with System Mechanic your system %26amp; internet connection goes in to
super high speed your system will start more fast
when running programs your system is at super high speed
with System Mechanic on the system you have a top super speed system %26amp; internet connection
1000% %26amp; you can use System Mechanic day by day to keep your pc and your internet connection
at 1000% speed
Automatically find and repair Windows security flaws that leave you open to attack from computer enemies such as spyware, adware, viruses, hackers, and identity thieves.
Use the new PC Repair Wizard to automatically diagnose and fix hundreds of problems with hard drives, system components, installed software, hardware, and more.
http://www.iolo.com/sm/6/index.cfm
Can anyone help in getting rid of this error message: error loading C:\PROGRA~1\MYWEBS~1\bar\4.bin...
I like how Cuite answers these questions and sometimes has no clue. Sounds like an advertisement she gave there...haha! I wonder if she gets any kickback from the Company.
Anyway,
You have spyware.
Mywebsearch bar is adware.
Get Adaware, Install/Update and run it to remove spyware.
You can also go to your Add/Remove program list and uninstall any programs that have Toolbar, or Searchbar.
Reply:System Mechanic will fixed your pc from a system crash
no need to format the hard drive :: System Mechanic gets your system back
with System Mechanic your system %26amp; internet connection goes in to
super high speed your system will start more fast
when running programs your system is at super high speed
with System Mechanic on the system you have a top super speed system %26amp; internet connection
1000% %26amp; you can use System Mechanic day by day to keep your pc and your internet connection
at 1000% speed
Automatically find and repair Windows security flaws that leave you open to attack from computer enemies such as spyware, adware, viruses, hackers, and identity thieves.
Use the new PC Repair Wizard to automatically diagnose and fix hundreds of problems with hard drives, system components, installed software, hardware, and more.
http://www.iolo.com/sm/6/index.cfm
RunShell("regsvr32.exe", '/s "C:\Users\MOM'SP~1\AppData\Loc... "", @NORMAL
I just bought a PC with the Vista OS on it and keep getting this message when trying to install "MS Windows Vista Activation Utility"..
RunShell("regsvr32.exe", '/s "C:\Users\MOM'SP~1\AppData\Loc... "", @NORMAL
Call the people you bought it from. You shouldn't have problems with a new PC.
RunShell("regsvr32.exe", '/s "C:\Users\MOM'SP~1\AppData\Loc... "", @NORMAL
Call the people you bought it from. You shouldn't have problems with a new PC.
When i start up my PC, i get a "cant load c:\progrm~1\myweb~1\bar\1bin\m... How can i get it back?
10 points quick to the first one to get me help with this..
When i start up my PC, i get a "cant load c:\progrm~1\myweb~1\bar\1bin\m... How can i get it back?
Well, I’d say, you don’t want it back! “myweb” refers to “MyWebb Search Toolbar” stay away from this as it is Adware. Run an Adware detection program and you will see. Good thing it didn’t start. Now just run a registry cleaner after the Adware program gets rid of it, and you will never see this again. Provided you are not lured back to getting the toolbar again.
apple
When i start up my PC, i get a "cant load c:\progrm~1\myweb~1\bar\1bin\m... How can i get it back?
Well, I’d say, you don’t want it back! “myweb” refers to “MyWebb Search Toolbar” stay away from this as it is Adware. Run an Adware detection program and you will see. Good thing it didn’t start. Now just run a registry cleaner after the Adware program gets rid of it, and you will never see this again. Provided you are not lured back to getting the toolbar again.
apple
When I start my computer I receive this message: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
So how do I eliminate this error, it tells me that it cannot find this module.
When I start my computer I receive this message: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
This is usually an indication that the startup entry was left behind after spyware was removed. Use the startup manager included with Spybot Search and Destroy to disable and/or remove the entry. This is much better than the msconfig pos bundled with windows. Hijackthis! can also be used but it can be dangerous so should only be used with guidance.
Reply:go to start %26gt; run %26gt; type msconfig
Go to the start up tab... Uncheck the box for that program.
When I start my computer I receive this message: Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
This is usually an indication that the startup entry was left behind after spyware was removed. Use the startup manager included with Spybot Search and Destroy to disable and/or remove the entry. This is much better than the msconfig pos bundled with windows. Hijackthis! can also be used but it can be dangerous so should only be used with guidance.
Reply:go to start %26gt; run %26gt; type msconfig
Go to the start up tab... Uncheck the box for that program.
Every time I turn on my computer a warning comes up.ERROR Loading c:\PROGRA~1\WILDA~\APPS\CDA\CD...
whats up with that
Every time I turn on my computer a warning comes up.ERROR Loading c:\PROGRA~1\WILDA~\APPS\CDA\CD...
virse
Reply:that file is in your startup and its deleted. try to remove it from the startup: press start, go to run, type msconfig then ok. On the window you see, open the auto startup, uncheck the file in question. You ca IM me for faster help
Every time I turn on my computer a warning comes up.ERROR Loading c:\PROGRA~1\WILDA~\APPS\CDA\CD...
virse
Reply:that file is in your startup and its deleted. try to remove it from the startup: press start, go to run, type msconfig then ok. On the window you see, open the auto startup, uncheck the file in question. You ca IM me for faster help
What does this mean and how do I fix it? error loading C:\programfiles\wild tangent\apps\CDA\cdaengineo400...
Wild Tangent is a program which accesses a game channel to play on-line board type games..it is really something you should avoid if possible. It has been known to deliver far more than games. McAfee actually considers is a PUP!!
What does this mean and how do I fix it? error loading C:\programfiles\wild tangent\apps\CDA\cdaengineo400...
wildtangent is spyware
What does this mean and how do I fix it? error loading C:\programfiles\wild tangent\apps\CDA\cdaengineo400...
wildtangent is spyware
On startup of pc get missing entry c:\windows\system32\spool\driv... what dioes it mean?
spool is for printing
On startup of pc get missing entry c:\windows\system32\spool\driv... what dioes it mean?
spool refers to printing. if you get a missing entry on startup then you've obviously uninstalled a printer driver from your system, but the uninstall didnt take the entry out of the startup/shutdown routines. Depending on what os you are running the entry will be in different places. easiest way of getting rid of the problem is either reinstall the driver and uninstall it again (to see if the uninstall removes the entry properly), or try and find the entry in the registry and delete it so its not trying to load it in the first place.
Reply:It means a print driver is missing or damaged in the start-up routine. As part of the boot cycle the system goes through all peripherals to make sure they are in good order. Even if you don't have a printer hooked up to your system, it will still look to make sure all the drivers are in good condition. You may have to reinstall a print driver, probably one that is in your Operating System install disk, to fix the problem.
Reply:go to add/remove ,remove your printer
then reinstalit from the c d you got with ya printer
augustifolia
On startup of pc get missing entry c:\windows\system32\spool\driv... what dioes it mean?
spool refers to printing. if you get a missing entry on startup then you've obviously uninstalled a printer driver from your system, but the uninstall didnt take the entry out of the startup/shutdown routines. Depending on what os you are running the entry will be in different places. easiest way of getting rid of the problem is either reinstall the driver and uninstall it again (to see if the uninstall removes the entry properly), or try and find the entry in the registry and delete it so its not trying to load it in the first place.
Reply:It means a print driver is missing or damaged in the start-up routine. As part of the boot cycle the system goes through all peripherals to make sure they are in good order. Even if you don't have a printer hooked up to your system, it will still look to make sure all the drivers are in good condition. You may have to reinstall a print driver, probably one that is in your Operating System install disk, to fix the problem.
Reply:go to add/remove ,remove your printer
then reinstalit from the c d you got with ya printer
augustifolia
I have windows XP and on start up i get the following error mess. c:\prog~1\bar\3.bin\MSBAR.DLL what does mean
this is when your system32 folder is getting messed up with something, simply locate your system32 folder via the serach tool and delete it and then restart your computer, and it will refresh itself on your next boot.
I have windows XP and on start up i get the following error mess. c:\prog~1\bar\3.bin\MSBAR.DLL what does mean
You installed a program called bar or something like that - it has a bad file. Reinstall it or remove it.
I have windows XP and on start up i get the following error mess. c:\prog~1\bar\3.bin\MSBAR.DLL what does mean
You installed a program called bar or something like that - it has a bad file. Reinstall it or remove it.
When i start i get this (( error loading C:progra 1\mywebs 1\bar\1.ben\mwsbar.dll)) the module couldn't found
This is a good thing! It looks like you had spyware at one point but don't any more.
When i start i get this (( error loading C:progra 1\mywebs 1\bar\1.ben\mwsbar.dll)) the module couldn't found
Skip this error message and go on.
Or try this go Start-%26gt;Run...-%26gt; write "msconfig" press "ENTER" -%26gt;go to StartUp upper Tab look there are many programs checked that start when computer starts uncheck all -%26gt;press OK -%26gt;Restart your computer. Or just uncheck those you know you don't need.
When i start i get this (( error loading C:progra 1\mywebs 1\bar\1.ben\mwsbar.dll)) the module couldn't found
Skip this error message and go on.
Or try this go Start-%26gt;Run...-%26gt; write "msconfig" press "ENTER" -%26gt;go to StartUp upper Tab look there are many programs checked that start when computer starts uncheck all -%26gt;press OK -%26gt;Restart your computer. Or just uncheck those you know you don't need.
How come when i start up my computer.. C:\PROGRA~1\WEBS~1\bar\1.bin\F... error message pops out?
i tried geeks to go... but it does not work...
How come when i start up my computer.. C:\PROGRA~1\WEBS~1\bar\1.bin\F... error message pops out?
You probably got a virus or you deleted or messed up some type of file. Do you have ur system recovery cds? if not call n get them and restart ur computer so it can be as if its new :)
Reply:Go to Start-%26gt;Run-%26gt; and type msconfig
Now go to the start up tab and look for that particular program in your list and uncheck it. Now reboot and you should be good to go
Reply:a missing file? maybe a virus deleted the file so windows finds it
run a virus scan, use AVG...
How come when i start up my computer.. C:\PROGRA~1\WEBS~1\bar\1.bin\F... error message pops out?
You probably got a virus or you deleted or messed up some type of file. Do you have ur system recovery cds? if not call n get them and restart ur computer so it can be as if its new :)
Reply:Go to Start-%26gt;Run-%26gt; and type msconfig
Now go to the start up tab and look for that particular program in your list and uncheck it. Now reboot and you should be good to go
Reply:a missing file? maybe a virus deleted the file so windows finds it
run a virus scan, use AVG...
When I start computer it says"ERROR LOADING C:\proga~1\MYWEBS~1\bar\1.BIN\... How do I fix this?
Hi
this error is caused by an Adware by name 'Mywebsearch.C'. Malware causes you computer to function in a abnormal way! may be your browser is redirected to some other webpage or you are receiving more unsolicited pop-ups.
download spybot anti-spyware (it is a free and safe tool) and after installing perform an update and scan your computer.
you can download spybot from this site:
http://www.safer-networking.org/en/downl...
it fixes most of the problems.
also, you can perform a free virus scan from trend micro at:
http://housecall.trendmicro.com
hope it solves your problem.
When I start computer it says"ERROR LOADING C:\proga~1\MYWEBS~1\bar\1.BIN\... How do I fix this?
dotnet is spyware that means your compu and internet explorer are infected by spyware
If you do not have firefox get it now and use it instead of internet explorer so you dont get any more spyware http://securitynewsfromthenet.blogspot.c...
To remove the spyware/trojan/virus run steps 1-2-3
1) If you have not already scanned your comp with spybot http://securitynewsfromthenet.blogspot.c... do that now .Update it (Latest updates 04-04-2007) and then run it so it gets rid of all the spyware and trojans in safe mode
1b) Run AVG Anti-Spyware Free
http://securitynewsfromthenet.blogspot.c...
or
SUPERAntiSpyware Home Edition (free version)
http://securitynewsfromthenet.blogspot.c...
2) Do an online virus scan to check and remove virus and spyware if you still have viruses on your computer. And let us know if the online virus scan still finds any virus or spyware .
http://securitynewsfromthenet.blogspot.c...
3) Get another anti virus program if your present anti virus program is not protecting you any longer
http://securitynewsfromthenet.blogspot.c...
Protection once your computer is spyware free
http://securitynewsfromthenet.blogspot.c...
Reply:You have MyWebSearch hijacker.
Other informations and how to remove it please go to:
http://www.pchell.com/support/mywebsearc...
Also try this:
1) Click on Start, Settings, Control Panel
2) Double click on Add/Remove Programs
3) Find "My Web Search" in the list of installed programs and click on Change/Remove to uninstall it.
You may also want to uninstall any of the following items associated with FunWebProducts.
My Web Search (Smiley Central or FWP product as applicable)
My Way Speedbar (Smiley Central or other FWP as applicable)
My Way Speedbar (AOL and Yahoo Messengers) (beta users only)
My Way Speedbar (Outlook, Outlook Express, and IncrediMail)
Search Assistant - My Way
4) Reboot your Computer and report back with success or failure (if failure, were you at least allowed to uninstall something and what was the name?)
Reply:Go to run in star menu and type msconfig then "enter" button.
You can see a window "System Configaratoin Utility ". go to startup placed at last one tab. remove "tick" mark which you unwanted and My Webs and restart the computer.You can not see that messeage again. ok.
nobile
this error is caused by an Adware by name 'Mywebsearch.C'. Malware causes you computer to function in a abnormal way! may be your browser is redirected to some other webpage or you are receiving more unsolicited pop-ups.
download spybot anti-spyware (it is a free and safe tool) and after installing perform an update and scan your computer.
you can download spybot from this site:
http://www.safer-networking.org/en/downl...
it fixes most of the problems.
also, you can perform a free virus scan from trend micro at:
http://housecall.trendmicro.com
hope it solves your problem.
When I start computer it says"ERROR LOADING C:\proga~1\MYWEBS~1\bar\1.BIN\... How do I fix this?
dotnet is spyware that means your compu and internet explorer are infected by spyware
If you do not have firefox get it now and use it instead of internet explorer so you dont get any more spyware http://securitynewsfromthenet.blogspot.c...
To remove the spyware/trojan/virus run steps 1-2-3
1) If you have not already scanned your comp with spybot http://securitynewsfromthenet.blogspot.c... do that now .Update it (Latest updates 04-04-2007) and then run it so it gets rid of all the spyware and trojans in safe mode
1b) Run AVG Anti-Spyware Free
http://securitynewsfromthenet.blogspot.c...
or
SUPERAntiSpyware Home Edition (free version)
http://securitynewsfromthenet.blogspot.c...
2) Do an online virus scan to check and remove virus and spyware if you still have viruses on your computer. And let us know if the online virus scan still finds any virus or spyware .
http://securitynewsfromthenet.blogspot.c...
3) Get another anti virus program if your present anti virus program is not protecting you any longer
http://securitynewsfromthenet.blogspot.c...
Protection once your computer is spyware free
http://securitynewsfromthenet.blogspot.c...
Reply:You have MyWebSearch hijacker.
Other informations and how to remove it please go to:
http://www.pchell.com/support/mywebsearc...
Also try this:
1) Click on Start, Settings, Control Panel
2) Double click on Add/Remove Programs
3) Find "My Web Search" in the list of installed programs and click on Change/Remove to uninstall it.
You may also want to uninstall any of the following items associated with FunWebProducts.
My Web Search (Smiley Central or FWP product as applicable)
My Way Speedbar (Smiley Central or other FWP as applicable)
My Way Speedbar (AOL and Yahoo Messengers) (beta users only)
My Way Speedbar (Outlook, Outlook Express, and IncrediMail)
Search Assistant - My Way
4) Reboot your Computer and report back with success or failure (if failure, were you at least allowed to uninstall something and what was the name?)
Reply:Go to run in star menu and type msconfig then "enter" button.
You can see a window "System Configaratoin Utility ". go to startup placed at last one tab. remove "tick" mark which you unwanted and My Webs and restart the computer.You can not see that messeage again. ok.
nobile
How do i fix this "C:\PROGRAM~1\Hotbar\BIN\451~1... error?
Hotbar is a spyware..you need to download and run a spyware removing program..you can find one of those at download.com
How do i fix this "C:\PROGRAM~1\Hotbar\BIN\451~1... error?
you will likely need to re-install hotbar then uninstall it from the Control Panel removal tool.
Reply:Spybot S%26amp;D
Adaware
How do i fix this "C:\PROGRAM~1\Hotbar\BIN\451~1... error?
you will likely need to re-install hotbar then uninstall it from the Control Panel removal tool.
Reply:Spybot S%26amp;D
Adaware
Can anyone tell me what Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin... means and how to get rid of
I get a error box upon startup and this box that says RUNDLL in the header. I ran a recovery and it is still there. Any ideas guys. You've been great in the past.
Thanks
Jim
Can anyone tell me what Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin... means and how to get rid of
You might try this....
One should do a disk cleanup everyday and defrag two or three times a week if the computer is used moderately.
You may need to do a Disk Cleanup..and be sure you have all the boxes checked....
Defrafg your C drive or what ever is your
main harddrive... Make sure you have selected the C Drive.... This is called a Disk Defragmenter...
Go to : Start...
programs..
accessories...
system tools..
Do this often...
Try the System Restore which takes you back to a time when your computer was working good. Go To:
start
programs
accessories
systems tools
system restore
This process is completely reversable. And does not remove your personal files. Just go back one checkpoint at a time until your puter is working good again.
E
Thanks
Jim
Can anyone tell me what Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin... means and how to get rid of
You might try this....
One should do a disk cleanup everyday and defrag two or three times a week if the computer is used moderately.
You may need to do a Disk Cleanup..and be sure you have all the boxes checked....
Defrafg your C drive or what ever is your
main harddrive... Make sure you have selected the C Drive.... This is called a Disk Defragmenter...
Go to : Start...
programs..
accessories...
system tools..
Do this often...
Try the System Restore which takes you back to a time when your computer was working good. Go To:
start
programs
accessories
systems tools
system restore
This process is completely reversable. And does not remove your personal files. Just go back one checkpoint at a time until your puter is working good again.
E
I get this message on my PC Error loading C:\PROGRA~\MYWEBS~1\bar\1.bin\... what does it mean?
MyWeb Search is running during startup. MyWebSearch is actually a spyware. The file was removed on the system but nor completely. You can try, removing it during startup
Click on Start
Click on Run
Type msconfig
Go to Startup Tab
Uncheck MyWebSearch there
Press Apply
Press OK
Run
http://www.ewido.net/onlinescan
- to remove completely the spyware
I get this message on my PC Error loading C:\PROGRA~\MYWEBS~1\bar\1.bin\... what does it mean?
The first folder is Program Files
c:\Progra~
The second begins exactly as it's spelled, but I don't know the full name so it's looking in
C:\Program Files\MYWEBS%26lt;rest of name unknown to me%26gt;\Bar
The bottom line is that it's tryng to load a program from that directory I'm guessing on startup.
Click the Start button, then look under Programs then Startup and see what's in there What ever it is the program may have been partially removed and thus causing you the error.
Click on Start
Click on Run
Type msconfig
Go to Startup Tab
Uncheck MyWebSearch there
Press Apply
Press OK
Run
http://www.ewido.net/onlinescan
- to remove completely the spyware
I get this message on my PC Error loading C:\PROGRA~\MYWEBS~1\bar\1.bin\... what does it mean?
The first folder is Program Files
c:\Progra~
The second begins exactly as it's spelled, but I don't know the full name so it's looking in
C:\Program Files\MYWEBS%26lt;rest of name unknown to me%26gt;\Bar
The bottom line is that it's tryng to load a program from that directory I'm guessing on startup.
Click the Start button, then look under Programs then Startup and see what's in there What ever it is the program may have been partially removed and thus causing you the error.
How can I get rid of this: Error loading C:\PROGRA..1\MYWEBS..1\bar\bin...
then go to that file and delete it .it may be a spyware .
or if you have installed something concerning with that file then uninstall it.
hibiscus
or if you have installed something concerning with that file then uninstall it.
hibiscus
Am getting error in C:\Windows\System 32\spool\drivers\w32x86\3\LXCI...
Has anyone else ever gotten this error? If so how did you correct it? I am using a DELL Dimension 3000 with XP Home. I just starting getting this error message. I am working on the PC for someone else. Also having to download all updates one at a time. Have been over this problem with Microsoft already. 17 pages of stuff to try and fix that problem. Dell no help either. I have tried to repair Windows twice so far. Lady is not very comfortable with format and reload.
Any ideas?
Thanks in advance.
Am getting error in C:\Windows\System 32\spool\drivers\w32x86\3\LXCI...
Anything that says System32 is a TROJAN HORSE virus. You need to clean the computer!
Any ideas?
Thanks in advance.
Am getting error in C:\Windows\System 32\spool\drivers\w32x86\3\LXCI...
Anything that says System32 is a TROJAN HORSE virus. You need to clean the computer!
I am getting an error after windows boots up missing file C:\PROGRAM~1\MYWEBS~1\1.BIN\MW...
I am not able to get online. I am running windows 98se, how do I go about fixing this?
I am getting an error after windows boots up missing file C:\PROGRAM~1\MYWEBS~1\1.BIN\MW...
something had partilay deleted some spyware but didnt get all of it update your antispyware and antivirus then run them in safe mode
I am getting an error after windows boots up missing file C:\PROGRAM~1\MYWEBS~1\1.BIN\MW...
something had partilay deleted some spyware but didnt get all of it update your antispyware and antivirus then run them in safe mode
When I sign on my computer I get this error message C:\proga~/\mywebs~/\bar\1'bin\...
how do I get rid of it
When I sign on my computer I get this error message C:\proga~/\mywebs~/\bar\1'bin\...
It sounds like a browser add on is conflicting with your system. If you have installed any toolbars, I would uninstall them all (leave Google or Yahoo bar as they have been made to integrate with IE), reboot and see if the error message goes. If it doesn't, you may need to run a malware removal programme, such as Ad-Aware. If you join the Ad-Aware web forum, you can get help to resolve any problems with your computer using other malware removal tools (such as HiJack This) and they will guide you through what to do.
Reply:Sounds like an virus or spyware.
Run your antivirus and spyware progs.
Hope this helps.
Good Luck.
When I sign on my computer I get this error message C:\proga~/\mywebs~/\bar\1'bin\...
It sounds like a browser add on is conflicting with your system. If you have installed any toolbars, I would uninstall them all (leave Google or Yahoo bar as they have been made to integrate with IE), reboot and see if the error message goes. If it doesn't, you may need to run a malware removal programme, such as Ad-Aware. If you join the Ad-Aware web forum, you can get help to resolve any problems with your computer using other malware removal tools (such as HiJack This) and they will guide you through what to do.
Reply:Sounds like an virus or spyware.
Run your antivirus and spyware progs.
Hope this helps.
Good Luck.
Saturday, May 22, 2010
Help with erroe c:\progra~1\mywebs~1\bar\1.bin... for xp home?
I am also expieriencing this problem. I have ran spybot s%26amp;d and lavasoft Ad Aware se personal. And are still having this problem. I am working to try to get it undercontrol. I have even removed the bar and it still occurs.
hydrangea
hydrangea
C:\PROGRA~1\COMMON~1\INSTAL~1\...
CAN'T FIND MODULE WHAT DOES THAT MEAN WHE I TRY TO UNINSTALL SOMETHING FROM ADD/REMOVE
C:\PROGRA~1\COMMON~1\INSTAL~1\...
try running the following two menus of ccleaner
cleaner %26gt; Analyze %26gt; Run Cleaner
issues %26gt; Scan For Issues %26gt; Fix Selected Issues
Read Howto of CCleaner on the link below
http://bestofrest.blogspot.com/2006/11/c...
Reply:To uninstall a program, "something" (without getting too technical) must be present so that the installer knows what to remove.
While the program is known to be installed, some parts needed to uninstall are missing.
If you are worried you can reinstall the program and then uninstall. Or remove the files associated with the program - though there could be registry entries left behind.
C:\PROGRA~1\COMMON~1\INSTAL~1\...
try running the following two menus of ccleaner
cleaner %26gt; Analyze %26gt; Run Cleaner
issues %26gt; Scan For Issues %26gt; Fix Selected Issues
Read Howto of CCleaner on the link below
http://bestofrest.blogspot.com/2006/11/c...
Reply:To uninstall a program, "something" (without getting too technical) must be present so that the installer knows what to remove.
While the program is known to be installed, some parts needed to uninstall are missing.
If you are worried you can reinstall the program and then uninstall. Or remove the files associated with the program - though there could be registry entries left behind.
When I turn on puter, I get c:\PROGRAM1\MYWEBS~1\bar\2.bin... module not found where's it at ?
How can I get it back and what's it for?
When I turn on puter, I get c:\PROGRAM1\MYWEBS~1\bar\2.bin... module not found where's it at ?
It sounds like a program that you had installed and possibly moved or tried to delete.
Go into START -- Settings -- Control Panel -- Add/Remove Programs -- look for anything that resembles MYWEBS and remove it.
If there is nothing there, click on START -- Startup -- and delete it if it is in the startup folder.
If there is nothing in there, the Right-Click on START -- Search -- in the file name box type *MYWEBS (make sure you include the *) -- in the look in box select your hard drive. Delete it from there if it brings up any results.
Other than that, I am all out of suggestions. Good luck
When I turn on puter, I get c:\PROGRAM1\MYWEBS~1\bar\2.bin... module not found where's it at ?
It sounds like a program that you had installed and possibly moved or tried to delete.
Go into START -- Settings -- Control Panel -- Add/Remove Programs -- look for anything that resembles MYWEBS and remove it.
If there is nothing there, click on START -- Startup -- and delete it if it is in the startup folder.
If there is nothing in there, the Right-Click on START -- Search -- in the file name box type *MYWEBS (make sure you include the *) -- in the look in box select your hard drive. Delete it from there if it brings up any results.
Other than that, I am all out of suggestions. Good luck
I need to know how to get C:PROGRA~1\MYWBS~1\BGN\1.BIN\M... back on my comp. so there is no error
I would look up the exact file name on a search site like http://www.google.com and I am sure it will tell you where you can download that.
Otherwise, ask someone to send it to you via email.
Otherwise, ask someone to send it to you via email.
I am getting an error message from Rundll it says error loading c:\progra l\mywebs 1bar\1bin\mwsbar.dll
how do I get rid of this error message?
I am getting an error message from Rundll it says error loading c:\progra l\mywebs 1bar\1bin\mwsbar.dll
http://ask-leo.com/mwsbardll_what_is_it_...
Reply:goto www.lavasoft.de and download the free version of adaware.
run it and it will remove any spyware you have
hawthorn
I am getting an error message from Rundll it says error loading c:\progra l\mywebs 1bar\1bin\mwsbar.dll
http://ask-leo.com/mwsbardll_what_is_it_...
Reply:goto www.lavasoft.de and download the free version of adaware.
run it and it will remove any spyware you have
hawthorn
When I clk "Read Mail" error msg box is: RUNDLL: ERROR LOADING C:\WINDOWS\DOWNLO~1\CONFLICT/....
The next line is: "The Specified module could not be found."
How do I correct this conflict. I have IE6.
When I clk "Read Mail" error msg box is: RUNDLL: ERROR LOADING C:\WINDOWS\DOWNLO~1\CONFLICT/....
i would say u have a virus esp when dills are corrupting, if u know how to ru scan disk , run it if problem persist and you cant find virus use system restore set it to date b4 this occurred, but if it is a virus you will have to get it out of there,,,,
Reply:sounds like a virus, go to system tool and restore your computer to an earlier time to when it worked fine
How do I correct this conflict. I have IE6.
When I clk "Read Mail" error msg box is: RUNDLL: ERROR LOADING C:\WINDOWS\DOWNLO~1\CONFLICT/....
i would say u have a virus esp when dills are corrupting, if u know how to ru scan disk , run it if problem persist and you cant find virus use system restore set it to date b4 this occurred, but if it is a virus you will have to get it out of there,,,,
Reply:sounds like a virus, go to system tool and restore your computer to an earlier time to when it worked fine
Anyone know anuthing about"C:\PROGRA~1\MYWEBS~1\bar... ?
i recently downloaded what was supposed to be an upgraded ver. of yahoo tool bar. i can not find it or previous ver. any where. and, each time i boot up i get the error message above and specified module could not be found. any answers out there? sixpack
Anyone know anuthing about"C:\PROGRA~1\MYWEBS~1\bar... ?
I have no idea. Good luck.
Anyone know anuthing about"C:\PROGRA~1\MYWEBS~1\bar... ?
I have no idea. Good luck.
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
Every time I turn on the computer, this is the first thing that comes on. Can someone please tell me what this is and why its here and how to get rid of it without downloading more spyware and viruses. Its been there for months and doesn't seem to cause any trouble, but after upgrading the yahoo.toolbar and getting spyware and viruses with it i'm NOT upgrading or downloading anything again. All i use computer for is news, music videos,e-mail and play cards. ty
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
Uninstall the toolbar app from your control panel. Then go to the folder location and make sure everything is gone. Then go to your registry and search for any related keys. Delete them.
Reply:It sounds like you may want to back up your stuff on your hard drive and re-install windows. Usually re-formatting fixes a lot of problems. ..If not, buy a Mac.
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
Uninstall the toolbar app from your control panel. Then go to the folder location and make sure everything is gone. Then go to your registry and search for any related keys. Delete them.
Reply:It sounds like you may want to back up your stuff on your hard drive and re-install windows. Usually re-formatting fixes a lot of problems. ..If not, buy a Mac.
Getting error- file missing C:\PROGRA~\MY WEBS~1\BAR\1.BIN\MWSBAR.DLL- cant get online?
This error comes up after windows boots.I am running Win98se
Getting error- file missing C:\PROGRA~\MY WEBS~1\BAR\1.BIN\MWSBAR.DLL- cant get online?
download, install and run ccleaner
Issues %26gt; Scan for Issues %26gt; Fix Selected Issues
That will remove the problem
http://bestofrest.blogspot.com/2006/11/c...
Getting error- file missing C:\PROGRA~\MY WEBS~1\BAR\1.BIN\MWSBAR.DLL- cant get online?
download, install and run ccleaner
Issues %26gt; Scan for Issues %26gt; Fix Selected Issues
That will remove the problem
http://bestofrest.blogspot.com/2006/11/c...
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
Every time I turn on the computer, this is the first thing that comes on. Can someone please tell me what this is and why its here and how to get rid of it without downloading more spyware and viruses. Its been there for months and doesn't seem to cause any trouble, but after upgrading the yahoo.toolbar and getting spyware and viruses with it i'm NOT upgrading or downloading anything again. All i use computer for is news, music videos,e-mail and play cards. ty
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
see link below for info and removal.
as it's been there for months i am
sure this will do it.
hope this helps.
additional, only just seen.
I note your reluctance to download anything,but
i am going to suggest 1 very small prog.. called
advanced windows care which is totally FREE.
I use this myself regular to clean and tidy up.
Please try this,paying attention to start up progs...
check all boxes and scan and click repair.whole
thing takes about 4 or 5 mins.you can go into
startup and they tell you trustworthy or unknown.
Please put your reluctance aside,you have nothing
to lose and worst way an exellent prog..for the
future which can stop things like this happening.
Ilook forward to an answer.
Reply:Rundll errors are related to the registry. Use a good registry cleaner to scan your computer. If it pulls up the error in question, you can fix it and solve your dilemma. The page below offers some free scans. Hope this helps!
http://www.delete-computer-history.com/w...
tropical flowers
RUNDLL X Error loading C:\PROGRA~1\MYWEBS~1\bar\3.bin... is this? how can i get rid of it
see link below for info and removal.
as it's been there for months i am
sure this will do it.
hope this helps.
additional, only just seen.
I note your reluctance to download anything,but
i am going to suggest 1 very small prog.. called
advanced windows care which is totally FREE.
I use this myself regular to clean and tidy up.
Please try this,paying attention to start up progs...
check all boxes and scan and click repair.whole
thing takes about 4 or 5 mins.you can go into
startup and they tell you trustworthy or unknown.
Please put your reluctance aside,you have nothing
to lose and worst way an exellent prog..for the
future which can stop things like this happening.
Ilook forward to an answer.
Reply:Rundll errors are related to the registry. Use a good registry cleaner to scan your computer. If it pulls up the error in question, you can fix it and solve your dilemma. The page below offers some free scans. Hope this helps!
http://www.delete-computer-history.com/w...
tropical flowers
What is C:\windows\system32\spool\driv... mean?
I had that going on in one of my older computers. I reloaded Windows and it has been fine since then.
What is C:\windows\system32\spool\driv... mean?
That is the file that is used by the operating system when printing documents. it is used so that you can print and do other tasks at the same time.
Reply:This is a folder where printer stores the spooled file temporarely for printing purposes.
Reply:I can't remember for sure but it's probably your printer spool.
I can't see the whole line here either.
If you're seeing that as an error, it could be a variety of problems. First that comes to mind is that your printer spool does not have enough disk space to write a file to disk before printing it. You should check your disk space and if it's low, delete some of the crap on your computer or get a new hard drive.
Reply:SPOOL is a directory where all the drivers for External (output devices) are stored such as printers, fax, zipdrivers, scanners etc.. all these devices are working on one thread while u can do your work that is these devices work backgroud and u can proceed with ur work. Y? Bcoz SPOOL means simultaneous pheripharals operation online i hope by this u can understand what spool means
Reply:Sounds like something to do with your print subsystem.
Reply:On drive C, there is a directory named "windows" that contains the subdirectory "system32," which contains a subsubdirectory named "spool," which contains a subsubsub directory called "driv" ...
It's basically a roadmap for navigating through files and folders on your computer.
Reply:C:\windows\system32\spool\
drivers\color\
such things as NEC Compatible 9300K G2.2.icm
if You right click on the files there it says color profile and such for monitors. other folders are empty here on my pc.
Reply:Spool drivers are mainly system files which works to function your devices like printers, scanners etc. when you give command for a print this drivers files stores the spooled file temporarily and quits as you finish your work.
Reply:It Holds the File Necessary for Printing and Printer.
What is C:\windows\system32\spool\driv... mean?
That is the file that is used by the operating system when printing documents. it is used so that you can print and do other tasks at the same time.
Reply:This is a folder where printer stores the spooled file temporarely for printing purposes.
Reply:I can't remember for sure but it's probably your printer spool.
I can't see the whole line here either.
If you're seeing that as an error, it could be a variety of problems. First that comes to mind is that your printer spool does not have enough disk space to write a file to disk before printing it. You should check your disk space and if it's low, delete some of the crap on your computer or get a new hard drive.
Reply:SPOOL is a directory where all the drivers for External (output devices) are stored such as printers, fax, zipdrivers, scanners etc.. all these devices are working on one thread while u can do your work that is these devices work backgroud and u can proceed with ur work. Y? Bcoz SPOOL means simultaneous pheripharals operation online i hope by this u can understand what spool means
Reply:Sounds like something to do with your print subsystem.
Reply:On drive C, there is a directory named "windows" that contains the subdirectory "system32," which contains a subsubdirectory named "spool," which contains a subsubsub directory called "driv" ...
It's basically a roadmap for navigating through files and folders on your computer.
Reply:C:\windows\system32\spool\
drivers\color\
such things as NEC Compatible 9300K G2.2.icm
if You right click on the files there it says color profile and such for monitors. other folders are empty here on my pc.
Reply:Spool drivers are mainly system files which works to function your devices like printers, scanners etc. when you give command for a print this drivers files stores the spooled file temporarily and quits as you finish your work.
Reply:It Holds the File Necessary for Printing and Printer.
Where can I find this file: C:PROGRA~1\MYWEBS~1\bar\1.bin\... to download???
It seems you are looking for a file in response to a message that states that the file is missing or corrupt.
If that is the case then you need to back up any data created by that software - if any, remove the software and then re-install it.
Software vendors don't usually provide individual files for their software.
Where can I find this file: C:PROGRA~1\MYWEBS~1\bar\1.bin\... to download???
You are referring to a program that already is in your computer and I have no idea nor will anyone else of what the file is named even because of the way you wrote your question.
Reply:I would love to help you BUT ..... I have no idea what you are talking about.
first, what type of file is it?
second, what is the name of the file?
third, do you want to download this file from the internet?
fourth, why do you think you need it?
If that is the case then you need to back up any data created by that software - if any, remove the software and then re-install it.
Software vendors don't usually provide individual files for their software.
Where can I find this file: C:PROGRA~1\MYWEBS~1\bar\1.bin\... to download???
You are referring to a program that already is in your computer and I have no idea nor will anyone else of what the file is named even because of the way you wrote your question.
Reply:I would love to help you BUT ..... I have no idea what you are talking about.
first, what type of file is it?
second, what is the name of the file?
third, do you want to download this file from the internet?
fourth, why do you think you need it?
How do you fix RUNDLL? Error loading C:\program files\acceleration software\anti-virus\sssmon.dll can't be fou
Your anti-virus software has a corrupted file. You will need to reinstall it.
Error loading c:\PROGRA~1\MYWEBS~1\bar\1.bin...
when i start my computer the window pops up with this message, how do i fix this problem and what did i do to cause it in the first place?
Error loading c:\PROGRA~1\MYWEBS~1\bar\1.bin...
i don't know what causes it that happens to my computer, what i do is that i do a clean up...and delete some programs i don't really use. It usually goes away. Sometimes i just change the desktop background.
sound cards
Error loading c:\PROGRA~1\MYWEBS~1\bar\1.bin...
i don't know what causes it that happens to my computer, what i do is that i do a clean up...and delete some programs i don't really use. It usually goes away. Sometimes i just change the desktop background.
sound cards
Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
This error message came up on system start for weeks although didn't seem to bother anything other then annoy me. After searching the web for "supposed" fixes and "suspected" malware %26amp; virus alerts I figured out the MWSBAR on the end meant My Web Bar from the My Web Search at Smiley Central (the place with 100+ different Smiley faces for emails, messenger and such) its NOT malware or anything to harm your PC at all, What happened to others is the same thing I did. Downloaded the My Web Search Toolbar (yes another toolbar) at the top of your screen in addition to explorer %26amp; yahoo %26amp; all the other toolbars you already had when you downloaded those cool little smileys then decided you didn't want it %26amp; deleted it or part of the file without uninstalling it correctly THUS the ERROR LOADING message at system start each time. To fix go to mywebsearch.com and reinstall the toolbar. Then go into control panel %26amp; add/remove programs and look for my web search and uninstall it. Problem Solved !!!
Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
Using start and Run the msconfig is the WORST thing you could do! He just told you what the original problem is and how to fix it correctly if you read what he wrote. The error is caused by partially deleting a program and not all of it. Therefore going into msconfig only puts the PC into a safe start and NOT an normal start up procedure which is why you get the other window you have to choose to ignore also. In order to fix the original problem correctly and NOT cause a completely different one stay out of msconfig since you don't know what your doing and let the system start in normal mode and uninstall the program completely as per his instructions above.
Reply:This error message appears because your system is still trying to load it and is unable to find it. To fix you go to start, run and type msconfig. Click on the startup tab and scroll till you find the reference to the offending file. Uncheck the box and click ok and restart your system.
Error loading C:\PROGRA~1\MYWEBS~1\bar\1.bin...
Using start and Run the msconfig is the WORST thing you could do! He just told you what the original problem is and how to fix it correctly if you read what he wrote. The error is caused by partially deleting a program and not all of it. Therefore going into msconfig only puts the PC into a safe start and NOT an normal start up procedure which is why you get the other window you have to choose to ignore also. In order to fix the original problem correctly and NOT cause a completely different one stay out of msconfig since you don't know what your doing and let the system start in normal mode and uninstall the program completely as per his instructions above.
Reply:This error message appears because your system is still trying to load it and is unable to find it. To fix you go to start, run and type msconfig. Click on the startup tab and scroll till you find the reference to the offending file. Uncheck the box and click ok and restart your system.
C:\WINDOWS\Microsoft.NET\Frame... could not be loaded?
Anyone know how to fix?
C:\WINDOWS\Microsoft.NET\Frame... could not be loaded?
It sounds like you have an application that is using the .NET Framework. Uninstall .NET Framework v2 from Control Panel, Add-Remove programs, then re-install the .NET Framework v 2 Service Pack 1, you can download it from
http://www.softpedia.com/get/Others/Sign...
C:\WINDOWS\Microsoft.NET\Frame... could not be loaded?
It sounds like you have an application that is using the .NET Framework. Uninstall .NET Framework v2 from Control Panel, Add-Remove programs, then re-install the .NET Framework v 2 Service Pack 1, you can download it from
http://www.softpedia.com/get/Others/Sign...
Every time i start up my desktop, i get a message saying c\program~1\mywe~\bpe\1wsbar.d... cannot load ? what ?
do to fix this problem?
Every time i start up my desktop, i get a message saying c\program~1\mywe~\bpe\1wsbar.d... cannot load ? what ?
This means that the DLL is no longer in that location. You can either restore that DLL or you can manually remove it from your startup.
To manually remove it, goto Start %26gt;%26gt; RUN%26gt; Type MSCONFIG
Then goto the "Startup" tab and look for the DLL. Then uncheck the box, click on Apply, Click Ok. Then reboot the PC.
Reply:Update your anti-virus
http://free.grisoft.com/ [If you do not have one]
Update your anti-spyware software.
http://www.microsoft.com/athome/security... [if you do not have one]
or
http://www.superantispyware.com/superant... [free home edition]
Restart your PC in safe mode
http://www.pchell.com/support/safemode.s...
And run a full scan with both.
You may also want to have a look at your start up items by using msconfig.
http://www.netsquirrel.com/msconfig/
Be careful with the items you uncheck, you can have a look here to see if they are necessary
http://www.greatis.com/appdata/index.htm...
You should also have a look at your IE Add-ons.
http://www.microsoft.com/windowsxp/using...
Disable any you do not use.
After you reboot back to normal mode, down load and install ccleaner to fix any registry problems.
http://www.ccleaner.com
Reply:download and install a freeware called ccleaner, then run two menus called cleaner and issues, that should solve your problem
Reply:go to RUN ...then type MSCONFIG then enter...
System Configuration Utility window comes out...
go to STARTUP tab and find the path displayed when u log-on ....once found, please uncheck the box and apply changes and restart ur pc.
:-)
Every time i start up my desktop, i get a message saying c\program~1\mywe~\bpe\1wsbar.d... cannot load ? what ?
This means that the DLL is no longer in that location. You can either restore that DLL or you can manually remove it from your startup.
To manually remove it, goto Start %26gt;%26gt; RUN%26gt; Type MSCONFIG
Then goto the "Startup" tab and look for the DLL. Then uncheck the box, click on Apply, Click Ok. Then reboot the PC.
Reply:Update your anti-virus
http://free.grisoft.com/ [If you do not have one]
Update your anti-spyware software.
http://www.microsoft.com/athome/security... [if you do not have one]
or
http://www.superantispyware.com/superant... [free home edition]
Restart your PC in safe mode
http://www.pchell.com/support/safemode.s...
And run a full scan with both.
You may also want to have a look at your start up items by using msconfig.
http://www.netsquirrel.com/msconfig/
Be careful with the items you uncheck, you can have a look here to see if they are necessary
http://www.greatis.com/appdata/index.htm...
You should also have a look at your IE Add-ons.
http://www.microsoft.com/windowsxp/using...
Disable any you do not use.
After you reboot back to normal mode, down load and install ccleaner to fix any registry problems.
http://www.ccleaner.com
Reply:download and install a freeware called ccleaner, then run two menus called cleaner and issues, that should solve your problem
Reply:go to RUN ...then type MSCONFIG then enter...
System Configuration Utility window comes out...
go to STARTUP tab and find the path displayed when u log-on ....once found, please uncheck the box and apply changes and restart ur pc.
:-)
Error loading C:\PROGRA~1\MyWaySA\SrchAsDe\1... The specified module could not be found
This is the error I get when trying to remove myway search assistant!HELP!
Error loading C:\PROGRA~1\MyWaySA\SrchAsDe\1... The specified module could not be found
1.) Download and install, Ad-Aware SE. In addition to the default settings, check these and make any necessary adjustments:
A.) Close ALL windows except Ad-Aware SE
B.) Click on the ‘world’ icon (at the top right of the Ad-Aware SE window) to let Ad-Aware SE update.
C.) Once the update is finished, click on the ‘Gear’ icon (second from the left at the top of the window) to access the Preferences/Settings window.
a.) In the ‘General’ window make sure the following are selected in green:
*Automatically save log-file
*Automatically quarantine objects prior to removal
*Safe Mode (always request confirmation)
b.) Under Definitions:
*Prompt to udate outdated definitions - set the number of days
B.) Click on the ‘Scanning’ button on the left and select in green:
a.) Under Driver, Folders %26amp; Files:
*Scan Within Archives
b.) Under Select drives %26amp; folders to scan:
*choose all hard drives
c.) Under Memory %26amp; Registry, all green:
*Scan Active Processes
*Scan Registry
*Deep Scan Registry
*Scan my IE favorites for banned URL’s
*Scan my Hosts file
C.) Click on the ‘Advanced’ button on the left and select in green:
a.) Under Shell Integration:
*Move deleted files to recycle bin
b.) Under Logfile Detail Level, all green:
*include addtional object information
*DESELECT - include negligible objects information
*include environment information
c.) Under Alternate Data Streams:
*Don't log streams smaller than 0 bytes
*Don't log ADS with the following names: CA_INOCULATEIT
D.) Click the ‘Tweak’ button and select in green:
a.) Under the ‘Scanning Engine’:
*Unload recognized processes during scanning
*Scan registry for all users instead of current user only
b.) Under the ‘Cleaning Engine’:
*Let Windows remove files in use at next reboot
c.) Under the Log Files:
*Include basic Ad-aware SE settings in logfile
*Include additional Ad-aware SE settings in logfile
*Please do not check or make green: Include Module list in logfile
E.) Click on ‘Proceed’ to save the settings.
F.) Click ‘Start’
*Choose:'Perform Full System Scan'
*DESELECT "Search for negligible risk entries", as negligible risk entries (MRU's) are not considered to be a threat.
G.) Click ‘Next’ and Ad-Aware SE will scan your hard drive(s) with the options you have selected and clean automatically.
H.) If Ad-Aware SE finds bad entries, you will receive a list of what it found in the window
I.) Save the log file when it asks and then click ‘Finish.’
J.) REBOOT to complete the removal of what Ad-Aware SE found.
2.) Download, install, and update Spybot S%26amp;D.
When you first run SpyBot, it will walk you through a Wizard which will perform a few critical functions (making a registry backup, getting the latest updates, etc.).
A.) Perform all of the Wizard's tasks.
B.) On the page that first opens when you start Spybot there is an option to immunize, you should do this.
C.) Scan with Spybot; after the scan is complete, have Spybot fix everything marked RED.
D.) In the immunize section there is also a link to download Spywareblaster. This program will prevent the installation of bad ActiveX controls in it's database. Download that, keep it updated, and have it enable all protection.
E.). Reboot.
Do the online antivirus scan.
Update your own antivirus program and run a full system scan with that as well.
3.) Reboot into Safe Mode.
4.) Open Windows Explorer, go to Tools, and in the Folder Options, select "Show hidden files and folders," and uncheck "Hide protected operating system files."
5.) For every User listed under C:\Documents and Settings, delete the entire contents of these folders (not the folders themselves):
Local Settings\Temp
Cookies
History
Local Settings\Temporary Internet Files\Content.IE5
Delete the entire contents of your C:\Windows\Temp folder.
Delete the entire contents of your C:\Temp folder (if you have one).
Do a search for *.tmp and delete all entries found.
6.) Empty your Recycle Bin.
7.) Reboot normally.
8.) Get Hijackthis from here:
http://www.merijn.org/files/hijackthis_s...
9.) Close all browser windows, scan with hijackthis, save the log, copy and paste the log here.
liama-song
Error loading C:\PROGRA~1\MyWaySA\SrchAsDe\1... The specified module could not be found
1.) Download and install, Ad-Aware SE. In addition to the default settings, check these and make any necessary adjustments:
A.) Close ALL windows except Ad-Aware SE
B.) Click on the ‘world’ icon (at the top right of the Ad-Aware SE window) to let Ad-Aware SE update.
C.) Once the update is finished, click on the ‘Gear’ icon (second from the left at the top of the window) to access the Preferences/Settings window.
a.) In the ‘General’ window make sure the following are selected in green:
*Automatically save log-file
*Automatically quarantine objects prior to removal
*Safe Mode (always request confirmation)
b.) Under Definitions:
*Prompt to udate outdated definitions - set the number of days
B.) Click on the ‘Scanning’ button on the left and select in green:
a.) Under Driver, Folders %26amp; Files:
*Scan Within Archives
b.) Under Select drives %26amp; folders to scan:
*choose all hard drives
c.) Under Memory %26amp; Registry, all green:
*Scan Active Processes
*Scan Registry
*Deep Scan Registry
*Scan my IE favorites for banned URL’s
*Scan my Hosts file
C.) Click on the ‘Advanced’ button on the left and select in green:
a.) Under Shell Integration:
*Move deleted files to recycle bin
b.) Under Logfile Detail Level, all green:
*include addtional object information
*DESELECT - include negligible objects information
*include environment information
c.) Under Alternate Data Streams:
*Don't log streams smaller than 0 bytes
*Don't log ADS with the following names: CA_INOCULATEIT
D.) Click the ‘Tweak’ button and select in green:
a.) Under the ‘Scanning Engine’:
*Unload recognized processes during scanning
*Scan registry for all users instead of current user only
b.) Under the ‘Cleaning Engine’:
*Let Windows remove files in use at next reboot
c.) Under the Log Files:
*Include basic Ad-aware SE settings in logfile
*Include additional Ad-aware SE settings in logfile
*Please do not check or make green: Include Module list in logfile
E.) Click on ‘Proceed’ to save the settings.
F.) Click ‘Start’
*Choose:'Perform Full System Scan'
*DESELECT "Search for negligible risk entries", as negligible risk entries (MRU's) are not considered to be a threat.
G.) Click ‘Next’ and Ad-Aware SE will scan your hard drive(s) with the options you have selected and clean automatically.
H.) If Ad-Aware SE finds bad entries, you will receive a list of what it found in the window
I.) Save the log file when it asks and then click ‘Finish.’
J.) REBOOT to complete the removal of what Ad-Aware SE found.
2.) Download, install, and update Spybot S%26amp;D.
When you first run SpyBot, it will walk you through a Wizard which will perform a few critical functions (making a registry backup, getting the latest updates, etc.).
A.) Perform all of the Wizard's tasks.
B.) On the page that first opens when you start Spybot there is an option to immunize, you should do this.
C.) Scan with Spybot; after the scan is complete, have Spybot fix everything marked RED.
D.) In the immunize section there is also a link to download Spywareblaster. This program will prevent the installation of bad ActiveX controls in it's database. Download that, keep it updated, and have it enable all protection.
E.). Reboot.
Do the online antivirus scan.
Update your own antivirus program and run a full system scan with that as well.
3.) Reboot into Safe Mode.
4.) Open Windows Explorer, go to Tools, and in the Folder Options, select "Show hidden files and folders," and uncheck "Hide protected operating system files."
5.) For every User listed under C:\Documents and Settings, delete the entire contents of these folders (not the folders themselves):
Local Settings\Temp
Cookies
History
Local Settings\Temporary Internet Files\Content.IE5
Delete the entire contents of your C:\Windows\Temp folder.
Delete the entire contents of your C:\Temp folder (if you have one).
Do a search for *.tmp and delete all entries found.
6.) Empty your Recycle Bin.
7.) Reboot normally.
8.) Get Hijackthis from here:
http://www.merijn.org/files/hijackthis_s...
9.) Close all browser windows, scan with hijackthis, save the log, copy and paste the log here.
liama-song
Win32:ctx virus help the location c:/system volume information\_restore.... and the name well its a .dll?
om using avast and its in the chest
Win32:ctx virus help the location c:/system volume information\_restore.... and the name well its a .dll?
As I said in your other question:
"When using a virus scanner to clean a virus it is advisable for you to turn off system restore. System restore keeps an account of the files on your computer in case your computer has major issues and you need to go back to when it was working properly. When eliminating the viruses and spy ware, it remains inside the system restore data and shows up on a virus scan. Once you delete the virus from your computer then restart system restore and it will all be permanently eliminated."
Reply:I choose not to answer this question because you unnecessarily posted multiple of the same question, which just annoys the heck out of me.
Win32:ctx virus help the location c:/system volume information\_restore.... and the name well its a .dll?
As I said in your other question:
"When using a virus scanner to clean a virus it is advisable for you to turn off system restore. System restore keeps an account of the files on your computer in case your computer has major issues and you need to go back to when it was working properly. When eliminating the viruses and spy ware, it remains inside the system restore data and shows up on a virus scan. Once you delete the virus from your computer then restart system restore and it will all be permanently eliminated."
Reply:I choose not to answer this question because you unnecessarily posted multiple of the same question, which just annoys the heck out of me.
Win32:virus help the location c:/system volume information\_restore.... and the name well its a .dll?
im using avast and it is in the chest right now
Win32:virus help the location c:/system volume information\_restore.... and the name well its a .dll?
When using a virus scanner to clean a virus it is advisable for you to turn off system restore. System restore keeps an account of the files on your computer in case your computer has major issues and you need to go back to when it was working properly. When eliminating the viruses and spy ware, it remains inside the system restore data and shows up on a virus scan. Once you delete the virus from your computer then restart system restore and it will all be permanently eliminated.
Reply:its a vrus for sure, delete reboot and defrag, then a virus scan once more.
Reply:get rid of avast its not so good....try Avg antivirus...its free and u can download it form
htt://www.download.com
Win32:virus help the location c:/system volume information\_restore.... and the name well its a .dll?
When using a virus scanner to clean a virus it is advisable for you to turn off system restore. System restore keeps an account of the files on your computer in case your computer has major issues and you need to go back to when it was working properly. When eliminating the viruses and spy ware, it remains inside the system restore data and shows up on a virus scan. Once you delete the virus from your computer then restart system restore and it will all be permanently eliminated.
Reply:its a vrus for sure, delete reboot and defrag, then a virus scan once more.
Reply:get rid of avast its not so good....try Avg antivirus...its free and u can download it form
htt://www.download.com
What is RUNDLL C::/PROGRA~1\MYWEBS~1\bar\1.bi...
It's a computer nasty
This place has more info.
http://www.2-spyware.com/file-mwsbar-dll...
This place has more info.
http://www.2-spyware.com/file-mwsbar-dll...
I have a RUNDLL error c:PROGRA~\MYWEB~1\bar\1.bin\MW... how do i get rid of it?
I have deleted it from the contol panel and went through all the files and can't find any more files anywhere but I keep getting it when i boot up my computer. I need help! I tryed reg cure and that didn't work? Please can someone help me. Thanks
I have a RUNDLL error c:PROGRA~\MYWEB~1\bar\1.bin\MW... how do i get rid of it?
The best i could find out it could be a variant of the web search tool bar. If it is it is ad-ware. Try running Ad ware Personal edition and see if that get rid of it. Hope this helps.
Reply:Download cc cleaner (it's free and will help clean out your registry) Otherwise try a on line scanner for viruses and spy ware. Peace!
Reply:Go to START, RUN type in MSCONFIG and press ENTER, go the the STARTUP tab, but do not chang anything on any other tab. On the startup tab, see if you can see that program on the list, if you do uncheck the entry and apply the settings.
garden state
I have a RUNDLL error c:PROGRA~\MYWEB~1\bar\1.bin\MW... how do i get rid of it?
The best i could find out it could be a variant of the web search tool bar. If it is it is ad-ware. Try running Ad ware Personal edition and see if that get rid of it. Hope this helps.
Reply:Download cc cleaner (it's free and will help clean out your registry) Otherwise try a on line scanner for viruses and spy ware. Peace!
Reply:Go to START, RUN type in MSCONFIG and press ENTER, go the the STARTUP tab, but do not chang anything on any other tab. On the startup tab, see if you can see that program on the list, if you do uncheck the entry and apply the settings.
garden state
What is c:\Users\****** \AppData\local\Temp\efcAQJbX.d...
when I start my computer this window comes up under ( RunDll) could not find in win 32 application?
What is c:\Users\****** \AppData\local\Temp\efcAQJbX.d...
Usually Temp folders hold files temporarily as the name would imply during the installation of software or temporary internet files through internet usage. I always delete any files I find in my Temp folders.
What is c:\Users\****** \AppData\local\Temp\efcAQJbX.d...
Usually Temp folders hold files temporarily as the name would imply during the installation of software or temporary internet files through internet usage. I always delete any files I find in my Temp folders.
Subscribe to:
Posts (Atom)